Description

Mitsubishi PLC FX3U-64MR-ES-A

Major Features:-

1. Basic functions

[Up to 384 input/output points]

The number of input/output points (up to 256 points) wired directly to the PLC and remote input/output points (up to 256 points) on the

network (CC-Link) can be increased to 384points in total.

[Powered extension units/blocks that can be connected]

FX2N Series input/output powered extension units/blocks can be connected.Up to 8 FX0N/FX2N/FX3U Series special function

units/blocks can be connected.(Among FX0N Series, only FX0N-3A can be connected.)

[Program memory]

The PLC has a 64K-step RAM memory.Use of the memory cassette enables the program memory to be used as flash memory.

[Operation instructions]

Various instructions, such as floating-point and character string processing instructions and scaling instructions, are provided.

[Built-in RUN/STOP switch]

The PLC can be started and stopped with the built-in switch.RUN and STOP commands can be given to the PLC through a general-purpose input terminal or peripheral device.

[Writing during RUN]

The programming software for personal computer enables you to modify the program while the PLC is running.

[Built-in clock function]

The PLC has a clock function to control the time.

[Programming tool]

Use a version of a programming tool supporting the FX3U.

2. Input/output high-speed processing functions of main unit.

[High-speed counter function]

1) Input terminals of main unit

– Input of open collector transistor output

– 1-phase 100 kHz x 6 points + 10 kHz x 2 points

– 2-phase 50 kHz x 2 points

2) Input terminals of high-speed input special adapter (FX3U-4HSX-ADP)

– Input of differential line driver

– 1-phase 200 kHz x 8 points (when 2 units are connected)

– 2-phase 100 kHz x 2 points (when 2 units are connected)

3. Display functions (display module)

FX3U-7DM Display Module (option) can be incorporated in the PLC.

The display module can be mounted on the panel by using the display module holder (option).

[Monitor/test function]

Devices can be monitored and tested by operating the buttons on the display module. The button operations can be inhibited by the user program.

[Message display function]

User messages can be displayed on the display module by the user program.

4. Communication and network functions-

The expansion board, special adapter and special function block for each communication function can be connected.

[Kinds of communication functions]

• Programming communication through RS-232C, RS-422 and USB.

• N:N Network

• Parallel link

• Computer link

• Inverter communication

• Non-protocol communication through RS-232C/RS-485

• CC-Link

– Master station (Compatible with CC-Link Ver. 2.00 and Ver. 1.10): FX3U-16CCL-M

– Master station (Compatible with CC-Link Ver. 1.10): FX2N-16CCL-M

– Intelligent device station: FX3U-64CCL

– Remote device station: FX2N-32CCL

• CC-Link/LT

– Master station: FX2N-64CL-M

– Remote I/O station, Remote device station

• MELSEC I/O LINK

– Master station: FX2N-16LNK-M

– Remote I/O station

• AS-i system

– Master station: FX2N-32ASI-M

– Slave station

→ Refer to Data Communication Edition–PDF