WAGO PLC SUPPLIER BANGLADESH

WAGO PLC 750-8101/025-000

Add to Wishlist
Add to Wishlist
  • Programmable via e!COCKPIT
  • Direct connection of WAGO’s I/O modules
  • 2 x ETHERNET (configurable)
  • Linux 3.18 operating system with RT‐Preempt patch
  • Configuration via e!COCKPIT or Web-Based Management interface
  • Maintenance-free
Category:
Tags:

Description

WAGO PLC 750-8101/025-000

Controller PFC100; 2 x ETHERNET; Ext. Temperature

WAGO PLC DESCRIPTION:

The WAGO PLC PFC100 Controller is a compact PLC for the modular WAGO I/O System. Besides network and fieldbus interfaces, the controller supports all digital, analog and specialty I/O modules found within the 750/753 Series.

Two ETHERNET interfaces and an integrated switch enable line topology wiring.

An integrated Webserver provides user configuration options, while displaying PFC100 status information.

FIND MORE PRODUCTS: CLICK

TECHNICAL DETAILS:

Communication Modbus (TCP, UDP)
ETHERNET
EtherNet/IPTM Adapter (slave), library for e!RUNTIME
MQTT
Visualization Web-Visu
Web Visu
Operating system Real-time Linux 3.18 (with RT-Preempt patch)
CPU Cortex A8; 600 MHz
Programming languages per IEC 61131-3 Instruction List (IL)
Ladder Diagram (LD)
Function Block Diagram (FBD)
Continuous Function Chart (CFC)
Structured Text (ST)
Sequential Function Chart (SFC)
Programming environment e!COCKPIT (based on CODESYS V3)
Configuration options e!COCKPIT
WAGO-I/O-CHECK
Web-Based Management
Baud rate (communication/fieldbus 1) 10/100 Mbit/s
Baud rate ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus) ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Main memory (RAM) 256MB
Internal memory (flash) 256MB
Non-volatile hardware memory 64kbyte
Program memory 12 MB (Program and data memory (dynamically distributed))
Data memory 12 MB Program and data memory (dynamically distributed)
Non-volatile software memory 64.kbyte
Type of memory card microSD up to 32 GB (all guaranteed properties only valid with WAGO’s memory card)
Memory card slot Push-push mechanism; Cover lid (sealable)
Number of modules per node (max.) 250
Number of modules without a bus extension (max.) 64
Supply voltage (system) 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection)
Input current (typ.) at nominal load (24 V) 550mA
Total current (system supply) 1,700mA
Supply voltage (field) 24 VDC (-25 … +30 %); via power jumper contacts
Current carrying capacity (power jumper contacts) 10A
Number of outgoing power jumper contacts 3
Isolation 500 V system/field