IFM Photoelectric distance sensor

IFM Photoelectric Distance Sensor O1D155

Add to Wishlist
Add to Wishlist
  • Dependable optical measuring of distance with great ranges up to 6 m.
  • There are two switching outputs, one of which can be programmed to be an analog output.
  • window and a scalable measuring range.
  • For the requirements of the automotive sector, laser protection class 1.
  • Great value for the money.
Category:
Tags:

Description

IFM Photoelectric Distance Sensor O1D155

O1DLF3KG/IO-LINK

01.Applications:-

  • The optical distance sensor measures distances between 0.3 and 6 m.
  • It has a background suppression at > 6…100 m.
  • The measured value is shown in a 10-segment display.
  • According to the set output functions 2 output signals can be generated.

02.Functions :-

♦  Output function hysteresis:- The hysteresis keeps the switching state of the output stable if the measured value varies about the sensing range. Both outputs (OUT1 and OUT2) can be set as hysteresis function. → 10.2.4 Hysteresis function.

♦  Output function window:- The window function enables the monitoring of a defined acceptable range. Both outputs (OUT1 and OUT2) can be set as window function. → 10.2.6 Window function.

♦  Analogue output function :-The sensor can also output an analogue signal on output 2 (OUT2) which is proportional to the distance. → 10.2.11 Scaling of the measuring range (analogue output).

♦  Switch off the laser :-For safety and maintenance purposes the laser of the unit can be temporarily switched off via the input on pin 5.

IFM Photoelectric Distance Sensor

TECHNICAL DATA:-

Product characteristics
Type of light red light
Laser protection class 1
Housing rectangular
Electrical data
Operating voltage [V] 18…30 DC
Current consumption [mA] < 150
Protection class III
Reverse polarity protection yes
Type of light red light
Wave length [nm] 650
Typ. lifetime [h] 50000
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs 2
Electrical design PNP
Number of digital outputs 2
Output function normally open / normally closed; (programmable)
Max. current load per output [mA] 200
Number of analogue outputs 1
Analogue current output [mA] 4…20; (IEC 61131-2)
Max. load [Ω] 250
Analogue voltage output [V] 0…10; (IEC 61131-2)
Min. load resistance [Ω] 5000
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Detection zone
Max. light spot width [mm] 8
Max. light spot height [mm] 8
Light spot dimensions refer to 6 m
Background suppression [m] 6…100
Measuring/setting range
Measuring range [m] 0.3…6; (white paper 200 x 200 mm 90% remission)
Sampling rate [Hz] 1…33
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Sensor Identification; Binary Data Channel, Process Value; Sensor Diagnosis
SIO mode yes
Required master port type A
Process data analogue 2
Process data binary 2
Min. process cycle time [ms] 6
Supported DeviceIDs
Type of operation DeviceID
Default 812
Operating conditions
Ambient temperature [°C] -10…60
Protection IP 67
Tests / approvals
EMC
EN 60947-5-2
Laser protection class 1
Notes on laser protection
Caution: laser light
laser class: 1
EN / IEC60825-1:2007
EN / IEC60825-1:2014
Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007.
MTTF [years] 186
Mechanical data
Weight [g] 310.5
Housing rectangular
Dimensions [mm] 59 x 42 x 52
Materials housing: diecast zinc; front pane: glass; LED window: PC
Displays / operating elements
Display
switching status 2 x LED, yellow
operation LED, green
distance value, programming alphanumeric display, 4-digit
Accessories
Accessories (optional)
Protective cover, E21133
Remarks
Remarks
operating voltage “supply class 2” according to cULus
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; coding: A