DATALOGIC PHOTOELECTRIC SENSOR S5 SERIES

DATALOGIC PHOTOELECTRIC SENSORS S5 SERIES

Add to Wishlist
Add to Wishlist

♦ A wide range of optic connections and functions.

♦ For all functions, long operating distances.

♦ Models with stable LEDs and trimmer adjustments.

♦ Plastic housing that is durable and impermeable.

Category:
Tags:

Description

DATALOGIC PHOTOELECTRIC SENSORS S5 SERIES

A variety of plastic tubular M18 photoelectric sensors are available in the S5 series. 
The fixed focus or diffuse proximity models with short, medium, or long operating distances up to 60 cm, the 4 m retroflex, 3 m polarized retroflex, and 1 m for the detection of transparent materials, the 12 m through the beam, and models with fiber-optic connection offer the widest range of optic functions.There are various variations with either axial or radial optics. With the comprehensive configuration of the NPN/ PNP output and dark/light mode, the series offers connector or cable connection, 3-wire Vac versions, or 4-wire Vdc versions. On the bottom of the sensor, a red LED displaying the output status is visible. In versions with trimmer adjustment, a green LED additionally indicates switching stability based on the strength of the received signal. Protection IP67 is always guaranteed by durable ABS housing.

DATALOGIC PHOTOELECTRIC SENSORS S5 SERIES-

TECHNICAL DATA:-
Power supply: 10 … 30 VDc (D.C.VERS.) REVERSE POLARITY PROTECTION,  15 … 264 Vac (a.c. vers.).
Consumption: 30 mA max. (d.c. vers.),

10 mA max. (a.c. vers.).
Light emission:  infrared LED 880 nm,

red LED 660 nm (B, E1 vers.).
Diffuse proximity operating distance: 1 … 10 cm (c10 vers.), 1 … 8 cm (c8 vers.).

1 … 35 cm (c35 vers.), 1 … 30 cm (c30 vers.).

1 … 60 cm (c60 vers.).
Fixed focus operating distance: 15 mm with 1 mm spot (D15 vers.).

50 mm with 2 mm spot (D50 vers.).
Retroreflex operating distance: 0.1 … 4 m (on R2)
Polarised retroflex operating distance: 0.1 … 3 m (on R2)
Retroreflex for transparent op. distance: 0.1 … 0.8 m (on R2)
through beam operating distance: 0 … 12 m (F/G12 vers.), 0 … 8 cm (F/G8 vers.)
Operating distance with fibre-optics: 22 mm proximity (with oF-18-ST).

85 mm through beam (with oF-19-ST).

refer to oF series for other fibers.
Setting:  sensitivity trimmer.

(A4, c8, c10, D15, D50, G vers. excluded).
Indicators:  red output LED.

green STABILITy LED (d.c. vers.).

red PoWER LED (G vers.).
Output type: NPN or PNP configurable (d.c. vers.)

ScR + bridge rectifier (a.c. vers.).
Saturation voltage: 2.5 V max. (vers. d.c.)
Output current: 150 mA max.(vers. d.c.), short-circuit prot.

100 mA max.(vers. a.c.).
Response time: 500 µs (D50 vers. )

1 ms max.
2 ms (F vers. in d.c.).
20 ms max. (a.c. vers.).
Switching frequency: 1KHz (D50 vers.).

500 Hz max.
250 Hz max. (F vers. in d.c.).
25 Hz max. (a.c. vers.).
Operating mode:  dark/light (configurable in 4 wires d.c. vers.)
Auxiliary functions: ‘test +’ and ‘test -’ inputs (G vers. in d.c.)
Connection: 4-pole M12 connector or 2 m Ø 5 mm cable
Electrical protection: class 1 (a.c. vers.); class 2 (d.c. vers.)
Mechanical protection:  IP67
Housing material: ABS
Lens material: PMMA plastic
Weight: 25 g max. (connector vers.); 100 g max. (cable vers.)
Operating temperature: -25 … +55°c
Storage temperature: -25 … +70°c
Reference standard: EN 60947-5-2