BENTLY NEVADA Trendmaster 200132 Pressure Transducer System
Trendmaster 200132 Pressure Transducer System – The 200132 sensor was designed to provide static (average) pressure measurements from general process monitoring to the Trendmaster† system. The Bently Nevada Trendmaster Pro online condition monitoring system links hundreds of permanently mounted transducers and measurement points onto a single-cable sensor network and transfers the data into System 1 machine condition monitoring software.
- Vibration.
- Temperature.
- Seal leaks.
- Pressure.
Description
BENTLY NAVADA Trendmaster 200132 Pressure Transducer System
The Dual Pressure flexiTIM* module interfaces 2 individual pressure transducers to the Trendmaster* 2000 System and is intended for non-dynamic pressure applications.The flexiTIM module and cable interfaces with pressure transducers using a 4-pin, locking bayonet connection. Compatible transducers are standard, millivolt output type devices with an output sensitivity of 10 mV/V. This flexibility allows the dual pressure flexiTIM system to measure a wide range of pressures under a variety of operating conditions. We offer a standard transducer for use with the flexiTIM module for convenience.
Specifications:-
All specifications are at 25 °C (77 °F) unless otherwise specified.
Electrical-
| Full Scale Range | The pressure transducer sets the Trendmaster full-scale pressure range. The user enters the transducer’s full-scale range into the Trendmaster software. |
| Accuracy | ±8.5% of the transducer full-scale rating (transducer accuracy not included). |
| Transducer Excitation Voltage | 4.98 Vdc ± 65 mVdc. |
| Maximum Transducer Supply Current | 2.5 mA absolute maximum available over temperature. |
| Transducer OK Range | 1 Vdc to 3 Vdc bias from transducer (nominal). |
| Resolution | 0.025% of transducer’s full scale rating. |
| Transducer | Bridge type meeting stated requirements. |
Environmental Limits-
| Operating Temperature | -40 °C to +100 °C (-40 °F to +212 °F). |
| Humidity | 100% condensing on exposed surfaces. 100% non-condensing on surfaces inside conduit. |
| Housing Materials | Powder-coated aluminum. |
| Weight | 554 g (20 oz) not including conduit body |
Mechanical:-
| Operating
Temperature |
-54 °C to +121 °C (-65 °F to
+250 °F). |
| Compensated
Temperature |
+10 °C to +93 °C (+50 °F to
+200 °F). |
| Connector | MS3113H8-4P, 4-position male
or equivalent: A = + Excitation B = + Out C = – Out D = – Excitation |
| Proof Pressure | 2X Full Pressure Scale. |
| Burst Pressure | 3X Full Pressure Scale |
| Pressure
Fitting |
1/4 – 18 NPT male. |
| Case Material | 316 Stainless Steel. |
| Insulation
resistance |
> 50 MΩ @ 50 VDC. |
200132 Pressure Transducer
| Pressure Ranges PSI SG | 30, 50, 100, 300, and 500. |
| Sensitivity | 10 mV/V ± 1%. |
| Zero Offset | ±3mV (±6% of full scale range) at atmospheric pressure (14.7 PSI). |
| Absolute Accuracy | ±4% over compensated temperature range. |
| Excitation | 5 Vdc to 10 VDC (nominal). |
| Input Resistance | > 2 K W. |
Related products
