Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Single-digit temperature controller with three digits.
- Sensor input: (TC: J, K, T, R, S/RTD: PT100).
- Control for ON/OFF/Auto-tuning PID.
- Only one set point.
- 12V SSR control output with a 10A relay.
- Compact size: 48 mm by 48 mm.
- Mount a panel.
- AC/DC supply voltage between 90 and 270V.
FMU90, FDU95, FDU93, FDU92, FDU91, FMU95, FDU91F, FMU30, FMU40, FMU41, FMU42
FMU44, FMU90, FMU95, FMR60B, FMR62B, FMR63B, FMR66B, FMR67B, FTL51B, FTL62, FTL51B
FTL64, FTLW23, QWX43, FMD71, FMD72, FMG50, FMP50, FMP51, FMP52, FMP53
FMP54, FMP55, FMP56, FMP57, FMR10, FMR20, FMR50, FMR57, FMU30, FMU40, FMU41, FMU42, FTL31
FTL33, FTL51C, FTL70, FTL80, FTM50, FWR30, FTW23, FTW33, FMI51, FTI51, FTI52, FTI55,FTI56, FTMI21
FMI52, FTC262, FTC260, FTI25
Read more
◆ Explosion protection to EN, IEC
◆ Can be used in Zone 1,2,21,22 -Class I Division 2- Groups A, B, C, D
◆ 2P,3P,4P and 5P.
◆ Only the switch in the socket cut off can plug be pulled out, power after inserting the plug.
GRP(glass fiber-reinforced polyester resin)
Read more
Proline Promag P 300 Electromagnetic Flowmeter, Proline Promag H 100 Electromagnetic Flowmeter, Proline Promag W 300 Electromagnetic Flowmeter,
Proline Promag W 400 Electromagnetic Flowmeter, Dosimag Electromagnetic Flowmeter, Proline Promag D 10 Electromagnetic Flowmeter,
Proline Promag E 100 Electromagnetic Flowmeter, Proline Promag H 200 Electromagnetic Flowmeter, Proline Promag H 300 Electromagnetic Flowmeter,
Proline Promag H 500 Electromagnetic Flowmeter, Proline Promag H 10 Electromagnetic Flowmeter, Proline Promag P 100 Electromagnetic Flowmeter,
Proline Promag P 200 Electromagnetic Flowmeter, Proline Promag P 500 Electromagnetic Flowmeter, Proline Promag P 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag W 800 Electromagnetic Flowmeter, Proline Promag W 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag 51W Electromagnetic Flowmeter, Proline Promag 55S Electromagnetic Flowmeter
Read more
Digital Combined pH/ORP Sensor Memosens CPS96D, Digital ORP Sensor Memosens CPS12E, Digital ORP Sensor Orbipore CPS92D, Digital pH Sensor Memosens CPS41E
Digital Combined pH/ORP Sensor Memosens CPS76D, Digital Conductivity Sensor Condumax CLS16D, Digital pH Sensor Memosens CPS61E
Digital Combined pH/ORP Sensor Memosens CPS16E, Digital non-glass pH Sensor Ceramax CPS341D, Digital pH Sensor Memosens CPS71E, Suspended Solids Sensor Turbimax CUS51D, Digital Conductivity Sensor Condumax CLS21D, Digital Oxygen Sensor Oxymax COS61D, Digital pH Sensor Memosens CPS31E, Digital ORP Sensor Ceraliquid CPS42D
Digital pH Sensor Memosens CPS91E, Digital pH Sensor Orbipac CPF81D, Digital Free Chlorine Sensor Memosens CCS51D, Digital Non-Glass pH SensorCeramax CPS341D
Immersion Assembly Dipfit CPA111, Memosens CPS77D
Read more
| 8BVI0014HWS0.000-1 | ACOPOSmulti inverter module, 1.9 A, AS, wall mounting | |
| 8BVI0028HWS0.000-1 | ACOPOSmulti inverter module, 3.8 A, AS, wall mounting | |
| 8BVI0055HWS0.000-1 | ACOPOSmulti inverter module, 7.6 A, AS, wall mounting | |
| 8BVI0110HWS0.000-1 | ACOPOSmulti inverter module, 15.1 A, AS, wall mounting | |
| 8BVI0220HWS0.000-1 | ACOPOSmulti inverter module, 22 A, AS, wall mounting | |
| 8BVI0330HWS0.000-1 | ACOPOSmulti inverter module, 33 A, AS, wall mounting | |
| 8BVI0440HWS0.000-1 | ACOPOSmulti inverter module, 44 A, AS, wall mounting | |
| 8BVI0660HWS0.000-1 | ACOPOSmulti inverter module, 66 A, AS, wall mounting | |
| 8BVI0660HWS0.008-1 | ACOPOSmulti inverter module, 66 A, AS, wall mounting | |
| 8BVI0880HWS0.004-1 | ACOPOSmulti inverter module, 88 A, AS, wall mounting | |
| 8BVI0880HWS0.008-1 | ACOPOSmulti inverter module, 88 A, AS, wall mounting | |
| 8BVI1650HWS0.000-1 | ACOPOSmulti inverter module, 165 A, AS, wall mounting | |
| 8BVI1650HWS0.004-1 | ACOPOSmulti inverter module, 165 A, AS, wall mounting | |
| 8BVI2000HWS0.000-1 | ACOPOSmulti inverter module, 200 A, AS, wall mounting |
A pH sensor is a piece of scientific equipment that precisely calculates the acidity and alkalinity of water and other liquids. The majority of businesses, including power plants, pharmaceuticals, food and beverage, primary, chemicals, oil and gas, and wastewaters, depend on this equipment.
Read more
Specifications
Valve Actuation : Solenoid
- Body Material : Brass, Stainless Steel, Lead-free Brass, 316 stainless steel on request
- Media : Aggressive Liquids/Gases, Air, Inert Gas, Ammonia, Cryogenic, Fuel Oil, Hot Water, Light Oil, Liquid Propane Gas, Natural Gas, Oxygen, Steam, Vacuum, Water
- Pipe / Port Size : 1/2 "; 3/8 "; 3/4 "; 1 "; 1 1/4 "; 1 1/2 "; 2 "; 2 1/2 "
- Port Type : NPTF, G (ISO 228/1)
- Function : 2 way - 2/2 Normally Closed, 2 way - 2/2 Normally Open
- Flow : From 1.3 to 39 Kv , 1.5 to 45 Cv
- Voltage : 24 AC, 110 AC, 115 AC, 12 DC, 12 to 24 DC Voltage Ranging, 120 AC, 120 DC, 125 DC Battery Charging, 208 AC, 220 AC, 230 AC, 24 DC, 24 to 120 AC/DC Voltage Ranging, 240 AC, 240 DC - 50/60, Uncommon voltages available upon request.
- Max Differential / Max Operating Pressure: Vacuum to 24 bar, Vacuum to 350 psi
- Operating Environment : Corrosive, Hazardous, Indoor, Outdoor
Offering a range of encoder from basic to the programmable. Datalogic encoders offer dimension reduction, without compromising robustness and overall performance.
ENC41-H06-0100-C15, ENC41-H06-0360-C15, ENC41-H06-0500-C15,ENC41-H06-1000-C15, ENC41-H06-1024-C15,ENC41-H06-2048-C15, ENC41-H06-4096-C15, ENC41-S06-0100-C15, ENC41-S06-0360-C15, ENC41-S06-0500-C15,ENC41-S06-1000-C15, ENC41-S06-1024-C15, ENC41-S06-2048-C15, ENC41-S06-4096-C15, FAC06-06,FBC06-06
Read more
For labeling and packaging, 953151070 SR21-IR 2 MM HIGH-RESOLUTION FORK SENSORS
1. A high switching frequency of 25 kHz
2. Models with IR or red/green lights
3. Label detection (SR21-IR) or print register mark detection (SR21-RG) on transparent films
4. 4 wire output with NPN and PNP
Read more
Features at a Glance
- Repetition accuracy: 5 µm
- Recognition of transparent objects
- Fine light beam (0,6 mm) over entire width of fork
- Teach-in
|
Individual relays |
|||
Individual relays within the RIDERSERIES RCM
|
|||
- Programmable via e!COCKPIT
- Direct connection of WAGO's I/O modules
- 2 x ETHERNET (configurable)
- Linux 3.18 operating system with RT‐Preempt patch
- Configuration via e!COCKPIT or Web-Based Management interface
- Maintenance-free
Spirax Sarco's PN9000 series diaphragm actuators are designed for spring return (failsafe) action.
Read more
The EP500 is a 2 wire loop powered positioner requiring a 4-20 mA control signal, and is designed for use with linear pneumatic valve actuators. The positioner compares the electrical signal from a controller with the actual valve position and varies a pneumatic output signal to the actuator accordingly.
Read more
Maximum process pressure
Read more
- DN25 - DN50 PN40.
- DN65 - DN200 PN16.
Stepless air pressure control is provided to an electrical signal by the Series ITVX2000 high-pressure electro-pneumatic regulator.
They use 3 W or less of power and have an easy-to-read digital pressure display.
The new series' maximum supply pressure is 5.0 MPa.
- Air pressure is continuously controlled in response to an electrical signal.
- 5.0 MPa is the maximum supply pressure.
- Range of the set pressure: 0.01 to 3.0 MPa.
- 3000 L/min is the maximum flow rate [ANR].
- Fluid: Air, N2, O2, Ar.
- Wetted parts: Fluorine grease.
Technical data:
Type: Temperature sensor with integrated IO-Link transmitter.
Measuring range: -50…200 °C / 58...392 °F.
Measuring medium : Water and aqueous liquids, non-aggressive gases.
Immersion tube length: 50...150 mm / 1.969...5.906".
Immersion tube diameter: 6 mm / 0.236".
Process connection: G½, G¼.
Nominal pressure : PN 25.
Medium temperature:, -50...200 °C / -58...392 °F.
Ambient temperature: -20...80 °C-4...176 °F.
Storage temperature-40...85 °C / -40...185 °F.
Degree of protection according to EN 60529: IP65.
Read more
Areas of application:
Read more
- Food industry
- Beverage industry
- Construction industry
- Automotive industry
- Timber industry
- 3 cable entries M 16 x 1.5.
- Thermoplastic enclosure.
- Coding level "High" according to ISO 14119.
- 52 mm x 90 mm x 30 mm.
- A long life.
- Large wiring compartment.
- High level of contact reliability with low voltages and currents.
Salzer offer limit switches in a range of different series. Each series is designed for a different application. The series are PC 100, PC 200, PC 300, PC 400, PC 600, PC 900 and PC 1500.
Salzer also have a wide range of foot switches such as compact foot switch, heavy duty foot switch, domestic foot switch, mini foot switch and meditwin.
DIN rail power supplies for 3-phase system 12 V, 8 A
♦ AC 380-480V Wide-range Input.
♦ Input Fuses Already Included.
♦ Requires only Two Legs of a 3-Phase System.
♦ Width only 40mm.
♦ Efficiency up to 85.8%.
♦ Input -Transient Blanking Circuit Included.
♦ Minimal Inrush Current Surge.
♦ Full Power Between -25°C and +60°C.
Read more
Parker’s D1VW directional control valves are high performance direct operated hydraulic valves. These are wet armature design solenoid valves in either 2 position or 3 position configurations. The D1VW valve conforms to D03 (NG6) mounting pattern.
Read more
Applications:
- Manufacturing Engineering
- Plastic injection molding
- Textile
- Packaging
- Sheet metal working
- Woodwork
- Automation Technology
| Medium | Compressed Air |
|---|---|
| Operating Temperature | 5 ... 176 °F |
| Standard | VDMA 24 345 |
| Actuation | Sol/Sol |
| ISO Size | ISO #1 |
| Operation | 5/2 |
| Materials - Body | Diecast aluminium |
| Materials - Nuts/Screws | Zinc plated steel |
| Materials - Seals | Nitrile rubber |
| Certification - WEEE | WEEE |
| Classification - eClass 11 | 51030190 |
| Range | SXE |
| Series | ISO Star |
| Brand | Norgren |
Micro-Change (M12) Single-Ended molex Cordset with Knurled Hexnut, 4 Poles, Female (90°) to Pigtail, 22 AWG, Black TPU WSOR Cable, 2.0m (6.56') Length.
Read more
Features-
Read more
- According to wenglor weproTec, there is very little mounting clearance.
- ASIC circuit technology that is innovative.
- Built-in error display.
-
Wattage :
- 75W~480W
-
Features :
- Metal case, economical models 1∅, full range input Slim size, model width: 32 ~ 85.5mm EMC EN55022 class B Assemble on industrial rail TS-35 / 7.5 or 15
I58S
Standard encoder for general industrial application - Size 58 mm - Resolution up to 10000 PPR (real) - Servo or clamp flange - High operating temperature range (optional)
| Manufacturer | Lika Electronic Srl |
|---|---|
| Description | Standard Lika encoder for general industrial application - Size 58 mm - Resolution up to 10000 PPR (real) - Servo or clamp flange - High operating temperature range (optional) |
| Item number | I58S |
| Housing-Ø (mm) | 58 |
| Shaft-Ø (mm) | 6, 8, 9.52, 10, 12 |
| max. resolution | 10000 PPR max. |
|---|---|
| Output circuit / Interface | NPN, PP, LD, Universal (PP+LD), sin/cos |
| Connection | Cable or connector output |
| Category | Industrial duty |
Technical data and features
| Technical data |
0.25 ... 45 kW |
|---|---|
| Connections |
1 AC 230 V
3 AC 400 V
3 AC 480 V
5x digital input
1x digital output
1x analog input
1x analog output
1x NO/NC relay
DC bus (400-V types)
Motor temperature monitoring |
Model: 2450
Ideal for the tightest installation spaces.
Read more
- Magnetic – robust
- Ideal for small devices
- Wear-free
- Dimension - Ø 24 mm
- Resolution - 12 bits singleturn
- Shaft type - Max 6 mm shaft, round
- Max 5 mm shaft, with flat surface
- Magnetic – robust
- Ideal for small devices
- Wear-free
- Dimension - Ø 24 mm
- Resolution - 12 bits singleturn
- Shaft type - Max 6 mm hollow shaft, blind hole
HDA 4000, for mobile and stationary hydraulics, various interfaces (CAN, HART),
Depending on version
for explosive atmospheres with ATEX, CSA, IECEx approval,
For applications with increased functional safety in acc. with EN ISO 13849-1 (PL d Cat. 3),
With flush membrane,
For shipbuilding and offshore with approval from:
- American Bureau of Shipping
- Lloyds Register of Shipping
- Det Norske Veritas / Germanischer Lloyd
- Bureau Veritas
Read more
VersaFlow Magnetic Flowmeters are highly versatile, customizable and offer precise flow measurement for conductive liquids, pastes and slurries.
| Product Family | RI58 |
| Ordering Information | RotaryEncoderRI58 |
| Fuction / Application | Incremental |
| Technology | Optical |
| Approval |
|
Mechanical
| Housing Diameter [mm] | 58 mm |
| Solid- / Hollow Shaft |
|
| Protection Rating Housing | IP40 / IP50 / IP64 / IP67 |
| Operating Temperatur [°C] | -25 ... +100 °C (depending on version) |
| Housing Option |
|
| Connection |
|
Incremental Encoder
- Versions with one or two channels.
- Alternative adaptive line driver.
- High-resolution, unbreakable code disc.
- Universal industrial plugs.
- Ingress protection NEMA 4X, IP67.
- Available with nickel- or stainless-steel-clad housing.
ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.
- Stator coupling for a surface in a plane.
- Up to 0.5 mm of axial tolerance.
- hollow blind shaft.
- Positioning accuracy of down to ± 60''.
- Capability for up to 4096 revolutions in a turn.
- 115 °C is the maximum operational temperature.
- Interfaces: EnDat and DRIVE-CLiQ.
- Housing diameter ≈ 35 mm.
The 1100 is a high-quality, low-cost isolated pressure sensor made entirely of stainless steel that can measure gases and liquids that are compatible with stainless steel. The 1100 pressure sensor is appropriate for industrial, refrigeration, hydraulics, off-road, construction, and agricultural applications and was created especially for those with strict pricing and performance criteria.
Read more
- Outstanding Long-Term Stability.
- 0-150 psi to 0-10000 psi Ranges (0-10 bar to 0-700 bar).
- High Proof Pressures with Completely Wetted Stainless Steel Components.
- The best price-to-performance ratio in its class for a small package size.
- Proven Thin Film Sensor Technology.
Miniature power relays 12 A with 2 pole changeover contacts for plug in mount on sockets are Type 56.32 and are manufactured by 187 Faston.
Features include:-
Read more
- With an adaptor with 187 Faston, 4.8 x 0.5 mm connections, flange installation is possible.
- AC or DC coil.
- mechanical indication and lockable test button.
- Cadmium-free contacts (standard version).
- Options for material contact.
- Utilized with 96 Series sockets.
- EMC suppression and coil indicator modules for the 99 Series are compatible with this.
- Accessories available.
- European patent.
- Also available in:-Type 56.32-0300 (with 2 pole normally open contact (≥ 1.5 mm gap).
The space-saving single-cable approach greatly minimizes installation effort, and the servo motor EMMT-AS for demanding and dynamic applications has a very good controllability and route accuracy for positioning jobs.
Read more
- Brushless, synchronous, permanent magnet motor.
- Either a single-turn or multiple-turn digital absolute linear potentiometer.
- High synchronization is supported even at low rotational speeds by an extremely low cogging torque.
- One connecting cable serves as the supply and encoder in simple connection technology (OCP: One Cable Plug).
- Angle-adjustable rotating plug (310°).
- offering a holding brake.
The 2704 is a single, two, or triple-loop format process controller that is extremely accurate and stable. Setpoint programming and a wide range of arithmetic and logic functions are included.
Read more
Features:-
- Solenoid operating voltage optionally 24 VDC / 110 VAC / 230 VAC.
- With 2 switching contacts or with 4 switching contacts.
- LED function display for different voltage ranges.
- Mechanically locked, release by applying voltage.
- Electrically locked, locking by applying voltage.
Long-lasting inline flowmeter with a small, easily accessible transmitter.
Application-
• Measuring principle is characterized by a high operable flow range and direct mass flow measurement.
• Measurement of utility and process gases as well as gas mixtures in small line sizes Device properties.
• Inline version with DN 15 to 100 (½ to 4").
• Bidirectional measurement; high measuring performance.
• Patented drift-free sensor with SIL 2.
• Compact dual-compartment housing with up to 3 I/Os.
• Backlit display with touch control and WLAN access.
• Remote display available.
Read more
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
♦ A wide range of optic connections and functions.
♦ For all functions, long operating distances.
♦ Models with stable LEDs and trimmer adjustments.
♦ Plastic housing that is durable and impermeable.
Read more
♦Up to 46 I/Os - Base 16 DI (4 HighSpeed/ 12 AI ), 8 DO + 2 Solid State Relays.
♦Analog Inputs 4-20 mA, 0-10 Vc and 0-Vdc 12 bits.
♦Ethernet Modbus TCP/IP (Client/Server) and Modbus RTU RS485 via interface(Client/Server).
♦Event management & datalog via mail or FTP server.
♦PLC performance with the shape and ease of use of a logic controller.
Read more
According to IEC 61496-1/2, IEC 61508-1/2/3, and ISO 13849-1, Type 4 light curtains from the EXTENDED SLIM line are TÜV, CE, and UL certified. With integrated EDM*, restart interlock, and beam coding, protective heights vary from 170 to 1,610 mm. Users can also save money by using EDM instead of wired relays because it has a relay monitoring feature. The connection is made using an integrated 5-pin or 8-pin M12 pigtail, and the compact housing (26 26 mm) permits blind-zone-free placement. A world first, this selection of light curtains can be electronically controlled and monitored using a Bluetooth® signal and a free smartphone app.
Read more
Ultrasonic Sensor, Diffuse Reflective, M18 PBT housing, M12 Connector, Sn 50-400mm, Analogue Output 4-20mA+ NPN, Supply Voltage 15-30VDC, Operating Temperature -20-60C, Response time<50ms, Switching Frequency 10Hz, IP67, Teach-in.
Read more
- Measurement and control of flow up to 120 kg/h.
- Extremely high measurement accuracy and range.
- Excellent long-term stability, no need for zero-point correction.
- highly durable wet materials.
- Suitable for a wide range of liquids.
R900720175 - DIRECTIONAL SPOOL VALVE 4WE6E73-6X/EG24K4
Size 6, symbol E73, electrical with solenoid, 24 V DC
Shipped in 20 business days from Lohr, DE
R900722801 - DIRECTIONAL SPOOL VALVE 4WE6D6X/OFEG24N9K4/B30
Size 6, symbol D, electrical with solenoid, 24 V DC
Shipped in 20 business days from Lohr, DE
- The incremental HeavyDuty standard : HOG86 / POG86
- Unmatched variety, proven robustness : HOG9 / POG9
- The unrivalled benchmark : HOG10 / POG10
- The intelligent solution : HMG10P / PMG10P incremental
- SinCos output – LowHarmonics for outstanding signal quality: OGS71 ... HOGS151
- Solid shaft with EURO flange B10
- Complete portfolio of solid shaft designs
BANNER PHOTOELECTRIC SENSOR QS30 SERIES FEATURES:
- Innovative 30 mm housing design to suit almost any mounting requirement.
- High-power sensing with ranges up to 200 m.
- Available in opposed, high-power opposed, polarized and non-polarized retroreflective, diffuse, laser, fixed-field and adjustable-field and clear object sensing modes.
- Class 1 visible laser in diffuse and retroreflective models and Class 2 in diffuse models.
- Models with standard 10 to 30V dc supply voltage and bipolar NPN/PNP outputs or 24 to 250V ac/12 to 250V ac supply voltage with e/m relay output.
- Light- or dark-operate selectable or configurable, depending on model.
- IP67 or IP69K environmental rating, depending on model.
- Bright LED operating status indicators visible from 360°.
Features:
- General purpose, industrial grade transducer
- Diffused silicon sensor for high accuracy and reliability
- Rugged stainless steel construction
- Built-in pressure snubber for high pressure applications (2000 psi and above)
- Wide range of electrical connections available
Applications
- Oil pressure hydraulics
- Cranes
- Presses
- Gas metering
- HVAC
- Medical equipment
Pressure-rated inductive sensors
- Pressure-rated up to 500 bar
- High temperature-rated up to 120 °C
- Appropriate for use in explosion-protected areas
- Overall dimensions from M5 to M18
- Short and long configurations
- With and without fixed stop
Inductive standard sensors:
- Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
- Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
- Shielded and unshielded versions
- Flush variants with ranges of up to 15 mm
- Non-flush variants with ranges of up to 30 mm
- Plug or cable connection
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Technical Specification:
| Process Connection | CLEANadapt │ Tri-Clamp │ Varivent │ FLEXadapt ESF │ Thread | Without thread |
| Insertion length | 0…2000 mm (flush version available) |
| Wetted material | Stainless steel 1.4404 (AISI 316L) │ PEEK (Dependent on type ) |
| Measuring range | -200 °C …+400 °C |
| Accuracy | < ±0.1 °C/°F |
| Available versions | Head Ø18 mm │ Spacer │ Transmitter |
| Operating pressure | max. 50 bar | 10 bar (Dependent on type ) |
| Communication | 4…20 mA, IO-Link |
| 1766-L32AWA | MicroLogix 1400, 20 digital 120V ac inputs, 12 Relay outputs, 110/240V ac power | |
| 1766-L32AWAA | MicroLogix 1400, 20 digital 120V ac inputs, 12 Relay outputs, 4 Analog (12 bits) inputs, 2 Analog (12 bits) outputs, 110/240V ac power | |
| 1766-L32BWA | MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital normal 24V dc inputs, 12 relays outputs, 110/240V ac power | |
| 1766-L32BWAA | MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital normal 24V dc inputs, 12 relays outputs, 4 Analog (12 bits) inputs, 2 Analog (12 bits) outputs, 110/240V ac power | |
| 1766-L32BXB | MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital 24V dc inputs, 6 relay outputs, 3 fast 24V dc outputs, 3 normal 24V dc outputs, 24V dc power | |
| 1766-L32BXBA | MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital 24V dc inputs, 6 relay outputs, 3 fast 24V dc outputs, 3 normal 24V dc outputs, 4 Analog (12 bits) inputs, 2 Analog (12 bits) outputs, 24V dc power | |
| 1766-MM1 | Memory Module for MicroLogix 1400 |
Small actuator for the rotary movement of the final control elements.
100 Nm of rated torque for continuous positioning (80 lbf-ft).
Direct force transmission from the actuator push rod to the last control element.
- Rated speed :-PME120-AI/-AN – 20 to 60 s/90° .
- Operating angle:- – min 35° / max. 300° .
Narrow design:
- Space-saving housing, just 10 mm wide.
- Beam spacings between 5 and 100 mm
- 5 m operating range and measurement field lengths up to 3100 mm
Standard design
- 4 configurable inputs/outputs and IO-Link interface
- Response time of just 30 μs for very fast processes
- Lateral housing groove enables very flexible mounting
Reflection principle
- Reflection principle with operating range up to 700 mm
- Detection of small objects (e.g., 10 x 10 x 1 mm) at up to 3.5 m/s
- Readjustment when soiled, warning output for prefailure messages
Advantages:
- Models in multicolor (RGB) or white light (W) offer optimum performance for marker detection on colorfully printed or glossy films
- White light provides greater reliability in the case of contrast markers on glossy surfaces
- Multicolor (RGB) provides better performance with colorfully printed films
- Free selection of adjustment method: intuitively using removable potentiometers, quickly and precisely by means of teach buttons. Also of course remotely through teach via cable or IO-Link
- IO-Link with dual channel: for monitoring, diagnosis, easy changeover in the case of format change
- Three teach levels ensure the perfect adjustment routine for every application
- Static 2-point teach with stationary conveyor belt based on marker and background
- Dynamic 2-point teach with running conveyor belt
- Static 1-point teach detects any contrast markers in front of a homogeneous background
- Permanent signal indication through self-adjusting bar graph on the rear side of the sensor
- Tracking function with threshold tracking for fading contrast markers
- Fine adjustment of the switching threshold through "near-to-marker" teach or EasyTune (T)
- Light spot variants with horizontal or vertical alignment
- Flexible operating range of 13 mm +- 3 mm
- Maximum switching frequencies up to 22 kHz / response time 20 µs
- Small, compact housing made of nickel-plated metal, IP67 and IP69K and ECOLAB
- Reliable detection even with reflective objects.
- Operating ranges up to 24 m.
- Highly accurate positioning through extremely small laser light spot.
- Series: 5.
- Operating range, max.: 0.02 ... 4.5 m.
- Design: Cubic.
- Light source: LED, Red.
Description:
The TZIDC represents the digital, intelligent positioner for communication via HART within the positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.
Special Sensors:
2-wire AC/DC sensors with large voltage range: These 2-wire sensors are very versatile thanks to their large voltage range of 10-320 V AC and V DC.
Read more
Operating range 1-30 mm, switching frequency up to 100 Hz.
Certifications: CE.
Housing material: Plastic / brass, nickel-plated.
Connector and cable variants.
Part no.: 50136628
Read more
Special Features:
■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]Model: 111.12, back mount
Model: 111.10, lower mount (radial)
HTU218-1500/PT-M12
Ultrasonic sensor
Series: 200.
Operating principle: Diffuse reflection principle with background support...
Design: Cylindrical, 18 mm.
Operating range, max.: 0.15 ... 1.5 m.
Read more
Part no.: 50149542.
Technical Summary:
| Max. flow rate | 3300 L/h |
| Min. flow rate | 0.12 L/h |
| Max. flow rate | 872 USGPH |
| Min. flow rate | 0.03 USGPH |
| Drive speed control ratio | 3600:1 |
| Operating temperature range | 5 to 40 °C |
| Operating temperature range | 40 to 104 °F |
| Control types | EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS485, SCADA |
| Drive standards | CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) |
| Drive ingress rating | IP66, NEMA 4X |
| Drive power supply | 100-120 V/200-240 V 1ph 50/60 Hz 350 VA |
| Compatible tubing bore size | 9.6, 12.7, 15.9, 19, 25.4 mm |
Technical Summary
| Max. flow rate | 18 L/min |
| Min. flow rate | 0.001 L/min |
| Max. flow rate | 301 USGPH |
| Min. flow rate | 0.02 USGPH |
| Drive speed control ratio | 2650:1 |
| Operating temperature range | 5 to 40 °C |
| Operating temperature range | 41 to 104 °F |
| Control types | EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA |
| Drive standards | CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) |
| Drive ingress rating | IP31, IP66, NEMA 2, NEMA 4X |
| Drive power supply | 100-120 V/200-240 V 1ph 50/60 Hz 250 VA |
| Compatible tubing bore size |
Technical Summary:
| Max. flow rate | 3500 ml/min |
| Min. flow rate | 0.004 ml/min |
| Max. flow rate | 56 USGPH |
| Min. flow rate | 0 USGPH |
| Drive speed control ratio | 2200:1 |
| Operating temperature range | 5 to 40 °C |
| Operating temperature range | 40 to 104 °F |
| Control types | EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA |
| Drive standards | CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements), RoHS |
| Drive ingress rating | IP31, IP66, NEMA 2, NEMA 4X |
| Drive power supply | 115/230 V 1ph 50/60 Hz 135 VA |
| Compatible tubing bore size | 0.5, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm |
Series:-RSL 400
Application:-
♦ Mobile danger zone guarding.
♦ Mobile side guarding.
♦ Stationary access guarding.
♦ Stationary danger zone guarding.
Part no.: 53800207
WATSON MARLOW 300 SERIES CASED PUMP TECHMICAL SUMMERY:
| Max. flow rate | 3000 ml/min |
| Min. flow rate | 0.002 ml/min |
| Speed control ratio | 133:1, 147:1, 200:1, 27:1, 300:1 |
| Operating temperature range | 5 to 40 °C |
| Operating temperature range | 40 to 104 °F |
| Drive standards | CE, cETLus |
| Drive ingress rating | IP31 |
| Drive power supply | 1ph, 100-120 V, 220-240 V 50/60 Hz, 100 VA |
| Compatible tubing bore size | 0.13, 0.19, 0.25, 0.38, 0.5, 0.63, 0.76, 0.8, 0.88, 1.02, 1.14, 1.29, 1.42, 1.52, 1.6, 1.65, 1.85, 2.05, 2.29, 2.54, 2.79, 3.2, 4.8, 6.4, 8 mm |
TECHNICAL SUMMERY OF WATSON MARLOW 100 SERIES CASED PUMP:
| Max. flow rate | 190 ml/min |
| Min. flow rate | 0.0001 ml/min |
| Max. flow rate | 3.04 USGPH |
| Min. flow rate | 0.00002 USGPH |
| Max. operating pressure | 2 bar |
| Max. operating pressure | 30 psi |
| Speed control ratio | 100:1, 1000:1, 200:1, 2000:1, 32:1, 320:1 |
| Operating temperature range | 5 to 40 °C |
| Operating temperature range | 40 to 104 °F |
| Standards | CE, cETLus |
| Ingress rating | IP31, NEMA 2 |
| Power supply | Supplied with 24 VDC mains transformer plug (range 90-264 VAC 47-63 Hz) which comes with multi-country adaptors |
TECHMICAL SUMMERY FOR WATSON MARLOW Quantum single-use bioprocessing pumps:
| Min. flow rate | 5.33 ml/min |
| Max. flow rate | 20 L/min |
| Max. operating pressure | 3 bar |
| Speed control ratio | 4000:1 |
| Operating temperature range | 5 to 30 °C |
| Operating temperature range | 41 to 86 °F |
| Control types | Remote Analogue/Digital |
| Standards | CE, cETLus, IEC 61010-1 |
| Ingress rating | IP66, NEMA 12/13 |
| Power supply | 100-120 V/200-240 V 1ph 50/60 Hz 250 VA |
INDUCTIVE SENSOR-
Cylindrical inductive switch, working range Sa: 0-1.6 mm, 35 m length, 2000 mm cable connection,
one output with typically open PNP switching, supply voltage: 10-30 V DC, embedded installation, and IP 67 protection.
Part no.: 50146967.
The laser distance sensor is an optical distance sensor that operates according to the triangulation mea- surement principle.
The sensor consists of the following components:-
Read more
- Transmitter: laser spot.
- Receiver.
- White OLED display.
- Control panel with control buttons.
- Status LEDs.
Qdos Chemical Metering Pumps:
Delivering flow rates that remain constant right up to 7 bar Qdos chemical metering pumps give users a unique advantage over diaphragm metering pumps. Qdos pumps offer long maintenance intervals - reducing the impact of process downtime and lowering the overall cost of ownership.
The GWA-250-U0 dual limit value switch enables the parallel configuration of up to two switching
levels for continuous measurements without the installation of extra measurement equipment.
♦ The key coding switch allows for the simplest switching point change.
♦ Switchable input.
♦ Powering integrated converters.
Read more
Galvanic isolation, universal signal converter, and standard signal conversion.
♦ Installing is simple.
♦ Power supply that is universal.
♦ 3x isolated galvanic.
Read more
Pipe installation data logger with GSM data transmission, powered by a battery or an AC adapter.
♦ Installing in a 2" tube.
♦ Safety overflow.
♦ Using the most effective source for communication.
Read more
Hydrostatic level measurement using a level sensor with a 22mm diameter and a capacitive ceramic measuring cell
with an RS485 Modbus-RTU output signal.
♦ Reliable and efficient ceramic cell.
♦ Possible integrated temperature measurement.
♦ Low consumption of energy.
Read more
Independent data logger and IOT Gateway
♦Power supply options come in a variety of forms. ♦Using the most effective source for communication. ♦with up to 7 sensors and 12 measurement types.
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
An angle proportional inclination is transformed into a DC signal using the KINAX N702.
An analog current change (4–20 mA) that represents the output signal is accessible.
There is little mechanical wear on the pendulum from the sensor, which is non-contact.
Features:-
- Magnetoresistive inclination transducer
- Digital interfaces CANopen
- Robust aluminum housing
- Protection class IP66
- Oil damped pendulum
- Pendulum shaft without mechanical stop
Standard Pressure Transmitters
The pressure transmitters of the 21Y series are incredibly robust to environmental
impacts since they lack an internal seal and have a high insulation voltage of 300 VDC.
An intricate compensation circuit allows for the specification of a small total error band.
Electrical connections and pressure connections come in a variety of options.
SIMILAR SERIES:-
- Series 21PY.
- Series 21C.
- Series 23SY.
- Series 25Y.
KOBOLD room thermostats are suitable for industrial plants, greenhouses, and warehouses, and also for monitoring the maximum temperature in switchgear cabinets and relay stations. Room thermostats are supplied with TER-H 1 wall brackets.
Switching range:- -20 ... +20 ... +80 ... +130°C, adjustable. Material:-aluminum (housing). copper, brass, or stainless steel (probe). Micro switch:- SPDT max. 250 VAC, 8 (5) A at 250 VAC, 8 A at 24 VDC.
Pitot tube sensors are classified as differential pressure sensors for flow measurement.
Connection: G1 ... G 1½, 1 ... 1½" NPT, DN25 ... 80, ANSI 1 ... 3".
Material: stainless steel.
pmax: 400 bar.
tmax: 1175 °C.
Probe length: 50 ... 8000 mm (2" ... 600").
Read more
ELECTROMAGNETIC FLOWMETER
- High accuracy (±0.2%), with CT approvals (OIML R49, MI-001)
- 0D/0D installation acc. to MID MI-001 and OIML R49 accuracy class 1
- Flange: DN25…3000 / 1…120", max. PN40 / ASME Cl 300
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
VU 570 - Vortex ultrasonic sensor for flow measurement
Independent of the gas composition, flow meters for technical gases and mixed gases.The VU 570 helps you keep an eye on, control, and minimize your usage while
improving sustainability. One sensor can be used to track your consumption
of various gas compositions and gas types.
FA 500 - Dew point sensor with integrated display and alarm relay
- Dew point sensor FA 500 from -80 to 20°Ctd.
- For refrigeration, membrane, and desiccant dryers, the FA 500 is the perfect dew point sensor with an integrated display and warning relay.
FA 550 - Dew point sensor in robust die-cast aluminum housing
✓Robust dew point sensor for gases and compressed air
✓ The Dew point FA 550 is perfectly suited for measuring dew points outside and reliably does so even in punishing industrial settings.
✓Dew point measurement after adsorption dryers, membrane dryers, or refrigeration dryer in compressed air systems.
Read more
Pressure transmitter/pressure switch for typical applications with data memory Monitoring of gases, vapors, liquids, and dust at absolute or relative pressures.
With ceramic front-flush or internal diaphragm
With TFT-display, 4-20mA or 0-10V output and up to 4 pnp switching outputs.
♦ Color display and full text programming.
♦ Ceramic cell that is precise and stable.
♦ 500 000 measuring point data logger.
Read more
Ultrasonic flowmeter
✓ Suitable for use with both conductive and non-conductive liquids. ✓ Due to the seal-free sensor, there is high process safety. ✓ The measurement tube can move easily.
MODEL:-F630
Magnetic inductive flowmeter, small or separate ✓ The suitable device for every application, with a wide range of options. ✓ Possible spared variation. ✓ ATEX-Authorization. ✓ Applications for hygiene. ✓ Mechanism for detecting errors.
Multivariable, simple, and user-friendly smart magmeter for utilities
♦ Decent design.
♦ Enclosed control panel.
♦ Parameterization is possible via Bluetooth.
Flow switch and transmitter for basic industrial, sanitary, and aseptic applications.
♦ Applications for hygiene.
♦ Compact design.
♦ Speed of response.
Read more
♦ Installing a simple pressurized system is possible.
♦ High precision.
♦ Very little pressure drop.
Read more
♦ Quick response.
♦ Operator comfort is improved through display and operation on-site.
♦ Wireless.
Read more
♦Comprising a measurement portion, compressed air, and gas meter.
♦ Simple and affordable installation.
♦ Owing to its excellent accuracy, it is suitable for measuring leaks.
Read more
Special features:-
• Min/max value memory and display.
• Hold function.
• Taring function for weighing applications.
• Customer-specific linearization (40 value pairs or polynomial).
• Timer function.
• Four limit value monitoring functions.
• Individual user level.
• Separate application using structured text (ST code; option).
• Math and logic function (option).
• Fast wiring through Push-In technology.
• Analog output (option).
• RS485 or Ethernet interface (option).
• Additional analog and digital inputs via interface.
Read more
The JUMO di 308 signaling device shows standard signals in "simple text" as well as temperatures in °C or °F. The fundamental device is pre-configured with a voltage supply for two-wire transmitters, 1 analog input, 2 binary inputs, 2 relay outputs, and 2 logic outputs.
Read more
Operation is made simple with the JUMO LOGOSCREEN 700 paperless recorder's intuitive, icon-based operation and display approach. It is flexible and available in a variety of forms for process data gathering.
Read more
- Dependable optical measuring of distance with great ranges up to 6 m.
- There are two switching outputs, one of which can be programmed to be an analog output.
- window and a scalable measuring range.
- For the requirements of the automotive sector, laser protection class 1.
- Great value for the money.
1489 Thermal-Magnetic Circuit Breakers
Bulletin 1489-M Thermal-magnetic Circuit Breakers are UL 489 Listed for branch circuit protection in the United States and Canada, and they are certified as Miniature Circuit Breakers for IEC applications. These circuit breakers are ideal for extreme ambient conditions, feature fast breaking time, and superior shock and vibration resistance.
Read more
LOGO! 12/24RCE, a logic module with display, voltage supply: 12/24V DC/relay, 8DI (Digital Inputs), 4 of which can be used as AI (Analogue Inputs), 4DO (Digital Outputs), memory: 400 blocks, expandable, Ethernet, integral web server, data logging, standard micro SD card, for LOGO! SOFT COMFORT from version 8, older projects executable.
TCN4S-24R
- Display method : 4-digit 7-segment LED
- Control method : ON/OFF, P, PI, PD, PID
- Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC) RTD: DPt100Ω, Cu50Ω
- Sampling cycle : 100ms
- Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
- Power supply : 100-240VAC~ 50/60Hz
Product ID: 751102.
PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.
Read more
SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Read more
Danfoss FC 51 Micro Drive 0.37KW 3ph 400V Inverter
Model: FC-051PK37T4E20H3XXCXXXSXXX
Made By Danfoss in China
Read more
Danfoss FC 51 Micro Drive 0.37KW 3ph 400V Inverter
Danfoss 0.37KW VLT Micro Drive
Model: FC-051PK37T4E20H3XXCXXXSXXX
I/P: 3X380-480VAC 50/60Hz 1.9/1.7A
O/P: 3X380-480VAC 50/60Hz 1.2/1.1A
Made By Danfoss in China
Specifications
Attribute |
Value |
For Use With |
SIMATIC S7-200 Series |
Manufacturer Series |
S7-200 |
Number of Inputs |
14 |
Number of Digital Inputs |
14 |
Output Type |
Analogue, Digital, Transistor |
Voltage Category |
20.4 → 28.8 V dc |
Input Type |
Analogue, Digital |
Number of Digital Outputs |
10 |
Number of Outputs |
10 |
Communication Port Type |
RS485 |
Program Capacity |
12 kB |
Programming Language Used |
AWL, FUP, Ladder Logic |
Mounting Type |
Rack Mount |
Programming Interface |
Computer, SIMATIC PG/PC |
Output Current |
750 mA |
Number of Communication Ports |
1 |
Battery Backup |
Yes |
Length |
80mm |
Memory |
12 (Program Memory) kB, 8 (Data Memory) kB |
Width |
120.5mm |
Dimensions |
80 x 120.5 x 62 mm |
Maximum Operating Temperature |
+45°C |
Minimum Operating Temperature |
0°C |
Depth |
62mm |
FA-COM PLC: Analogue I/O Module
| Series | MELSEC-F SERIES |
|---|---|
| Type | FX3U |
| Power Supply (V) | 24 |
| Current Type | DC |
| Occupied I/O Points on PLC | 8 |
| Integrated Analogue Outputs | 4 |
| Output Voltage Range (V) | 0-10 |
| Output Current Range (mA) | 4-20 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
- Manufacturer : DELTA
- Product No. : DVP32ES200R
- Product Type : Programmable Logic Controller DVP Series
- DVP-ES2 Series Standard PLC
- Power Supply : 100 ~ 240 V
- Output Method : Relay
- Inputs : 16
- Outputs : 16
- Display method : 4-digit 7-segment LED.
- Control method : ON/OFF, P, PI, PD, PID.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II. RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω. Analog: 0-100mV, 0-5V, 1-5V, 0-10V. 0-20mA, 4-20mA.
- Sampling cycle : 50ms.
- Control output 1 : Current(DC0/4-20mA) or SSR drive(11VDC
) [ON/OFF]. - Option output : Alarm 1, RS485 comm.
- Power supply : 100-240VAC~ 50/60Hz.
- Protection structure : IP65(front panel).
SITOP DC UPS module 24 V/15 A uninterruptible power supply without interface input: 24 V DC/16 A output: 24 V DC/15 A.
Read more
- Display method: 4-digit 7-segment LED.
- Control method: ON/OFF control, P, PI, PD, PIDF, PIDS control.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), R(PR), S(PR), N(NN), W(TT) RTD: DPt100Ω, JPt100Ω
- Analog: 1-5VDC , 0-10VDC , DC4-20mA..
- Sampling cycle: 500ms.
- Control output : Relay(250VAC~ 3A).
- Power supply : 100-240VAC~ 50/60Hz.
- SIMATIC HMI TP900 Comfort.
- Comfort Panel.
- Touch operation.
- 9 "TFT display (widescreen).
- 16 million Colours.
- PROFINET interface.
- MPI/PROFIBUS-DP interface.
- Configuration memory: 12 MByte.
- Windows CE 6.0 (Microsoft-Support incl. Security updates discontinued) configurable from WinCC Comfort V11.
SIMATIC S7-200, CPU 226 Compact unit, AC power supply 24 DI DC/16 DO relay 16/24 KB program./10 KB data, 2 PPI/user-programmable interface.
- MASTER-K80S/120S
- Compact and high-function block type.
- Program capacity: 7k steps/10k steps.
- Various main and expansion modules.
- High-function built-in functions: Input filter, Positioning, PID, HSC, built-in Cnet.
- Diverse special/network modules On-line edit support.
SIMATIC S7-200, CPU 224XP Compact unit, DC power supply 14 DI DC/10 DO DC, 2 AI, 1 AO, 12/16 KB progr./10 KB data, 2 PPI/user-programmable interface.
Read more
-
Primary brand:-Mitsubishi Electric.
-
Main function:-CPU unit.
-
Product series / family name :-MELSEC-F (FX) Series.
-
Sub-range name :-FX3U.
-
Mounting mode :-DIN rail.
| Task: | Program |
|---|---|
| Function: | Automatic Control |
| Certification: | RoHS, CE |
| Condition: | New |
| Customized: | Non-Customized |
| Transport Package: | 1PC/Carton |
SITOP MODULAR/3AC/24VDC/40A
SITOP modular 40 A Stabilized power supply input: 400-500 V 3 AC output: 24 VDC/40 A .
Read more
SIMATIC S7-200, CPU 221 Compact unit, DC power supply 6 DI DC/4 DO DC 4 KB progr./2 KB data.
Read more
SMART Transmitter Power Supply, Output Current Sink
KFD2-STC4-Ex2-Y1
♦ 2-channel isolated barrier.
♦ 24 V DC supply (Power Rail).
♦ Input 2-wire SMART transmitters.
♦ Output 0/4 mA ... 20 mA current sink.
♦ Terminal blocks with test sockets.
♦ Up to SIL 2 acc. to IEC/EN 61508.
Read more
SITOP PSU100S/1AC/24VDC/5A
SITOP PSU100S 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A *Ex approval no longer available.
Read more
DC digital output module - Mitsubishi Electric (MELSEC-F (FX) Series FX2N) - 16I/O [16DO (16 x digital outputs (Rly. NO contacts; 2A / 240Vac or 24Vdc))] - with screw-clamp term. connections - DIN rail mounting - equivalent to FX2N16EYRESUL.
SIMATIC S7-200, CPU 226 Compact unit, DC power supply 24 DI DC/16 DO DC, 16/24 KB program./10 KB data, 2 PPI/user-programmable interface.
Read more
SITOP power supplies
The 24 V/20 A SITOP power supplies are built-in units, IP20 degree of protection, protection class I. Primary switched-mode power supplies for connection to 1-phase AC system (TN or TT system in accordance with VDE 0100 T 300 / IEC 364-3) with rated voltages of 120/230 V, 50/60 Hz; +24 V DC output voltage, isolated, shortcircuit- proof and idling-proof.
SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Read more
SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Read more
PNOZsigma contact expansion, outputs: 4 N/O, 1 N/C, UB 24 V DC, width: 17.5 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.
Read more
Retroreflective sensor with 0.2 m fixed cab
Read more
- Reliable sensor for standard applications.
- Miniature design with versatile mounting options.
- Reliable recognition of reflective objects and clear glass.
- Two machines in one: clear object detection or reflection operating mode with long range.
- TEACH-IN switch for setting the contrast detection levels.
- Automatic adjustment in case of soiling in contrast detection mode.
- Certified by ECOLAB.
SIMATIC S7-300, CPU 312 Central processing unit with MPI, Integr. power supply 24 V DC, Work memory 32 KB, Micro Memory Card required.
Read more
**spare part **SIMATIC DP, interface module IM 151-1 Standard for ET 200S; incl. termination module data volume of 244 bytes each for inputs and outputs; max. 63 I/O modules PROFIBUS DP V0 and V1 up to 2 m width can be connected; bus connection via 9-pin D-sub.
Read more
| Series | MELSEC-F SERIES |
|---|---|
| Type | FX3U |
| Power Supply (V) | 24 |
| Current Type | DC |
| Integrated Analogue Inputs | 4 |
| Input Type | THERMOCOUPLE |
| Applicable Thermocouple Type | K,J |
SIMATIC S7-200, CPU 226 Compact unit, AC power supply 24 DI DC/16 DO relay 16/24 KB progr./10 KB data, 2 PPI/user-programmable interface.
Read more
LS Electric XGB Series PLC, XBC Standard SU-Type Unit, 110/240VAC Input Power, 18 24VDC Inputs, 12 Relay Outputs, 2A/Point, 5A/COM, 5 COM, 2 Option slots, Expandable (Max. 254 pts) I/O, Expansion power provision 870mA.
Read more
SFB Technology (Selective Fuse Breaking), Screw connection, DIN rail mounting, Primary-switched Power Supply Unit by QUINT POWER, Input: 1-Phase, Output: 24 V DC / 20 A.
Read more
- Power: 5.5kW.
- Amps: 13.
- Supply: Three Phase 400v.
- Model: Delta VFD055E43A.
- Filter: Built-In.
- Performance: Mid Range.
- Dimensions: 130 x 260 x 169.2.
- Weight: 4.2kg.
- Torque: Constant Torque General Purpose.
High-end Programmable Logic Controller (PLC) CPU unit with built-in I/Os - Mitsubishi Electric (MELSEC-F (FX) Series FX3U) - 32I/O [16DI (16 x digital inputs (24Vdc; Sink/Source)) + 16DO (16 x digital outputs (Rly NO contacts; 2A / 240Vac or 30Vdc; 10ms response))] - 64Ksteps (RAM; Program) memory capacity - connection capacity 256 x I/O points - with screw-clamp term. connections (I.O's) - with RS-422 communication capability - Supply voltage 100Vac-240Vac (120Vac / 208Vac / 220Vac / 230Vac) - DIN rail mounting (150mm width) - equivalent to FX3U32MRES.
Delta MS300 Basic Compact Series AC Inverter for 2.2kW (3HP) 400V 3ph motor up to 5,5A at high overload or 2.2kW (3HP) up to 6,1A when Fan/Pump rated. Controls a typical AC induction, permanent magnet motor, IPM (Internal permanent magnet), and SPM using VxF or Sensorless Vector, which converts fixed frequency, three-phase, 400-volt input to variable frequency, three-phase, 400-volt output (surface mounted permanent magnet).
Input Current: 5,5A at High Overload, 6,1A when Fan/Pump rated.
Input Voltage: Three phase AC 380V–480V (-15 %~+10 %), 50/60 Hz.
Read more
SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s with inclined cable outlet, 15.8x 54x 39.5 mm (WxHxD), terminating resistor with isolating function, without PG socket.
Read more
SIMATIC DP, Electronics module f. ET200S, 2AI TC High Feature, 15 mm width, 15 bit+sign with internal temperature Compensation.
Specifications
Item Number: VFD075B43A-3.
Manufacturer: Delta Products.
Item Category: Drives.
Subcategory: AC.
Series: VFD-B.
Nominal Input VAC: 480 Volts AC.
Input Range VAC: 380 to 480 Volts AC.
HP (CT): 10 Horsepower.
Amps (CT): 18 Amps.
Input Phase: 3.
Operator Controls: Keypad Included.
Max. Frequency: 400 Hertz.
Braking Type: DC Injection; Dynamic Braking.
Motor Control-Max Level: Open Loop Vector (Sensorless Vector).
Closed Loop: No.
AC Line Regenerative?: No.
Dynamic Braking Trans?: Included
Enclosure Rating: NEMA 1; IP20.
Read more
Specifications:-
- Output frequency: 0.1~600Hz.
- 3 points adjustable V/f curve.
- Built-in PID feedback control.
- RFI-switch for IT mains.
- Built-in EMI filter (for models 230V 1-phase and 460V 3-phase).
- Use RS-485 communication interface (RJ-45) with Modbus protocol.
- Optional communication modules for multiple communication protocols, such as Profibus, DeviceNet, LonWorks and CANopen.
- Complete protection function.
Model: FX1N-24MR-ES/UL.
Max.number inputs/outputs: FX1N-24MR-DS 24 points.
Power supply: 100–240 V AC.
Integrated inputs: FX1N-24MR-DS 14 points.
Integrated outputs: 10 points.
Output type: Relay.
Power consumption(W): 30.
Weight(kg): 0.45.
Dimensions (W x H x D)mm: 90 x 90 x 75
Read more
The W12L-2 series of photoelectric sensors features laser technology that is optimally designed for individual applications. These sensors provide reliable object detection, fast response times and are enclosed in a rugged metal housing, which is ideal for use in all types of industrial applications.
At a glance-
• Best-in-class retro-reflective laser performance in a metal housing.
• Teflon® coating available.
• Precise autocollimation optics.
• Adjustable focus on retro-reflective sensors.
• High switching frequency of 2.5 kHz.
• Connection via cable or rotatable connector.
• Mounting options with through holes, blind holes, oblong holes and dovetail.
• Laser protection class 1 or 16.
Read more
Brand: Delta.
Product Model: DVP04DA-S.
Manufacturer: DELTA.
Product No. : DVP04DA-S.
Product type : Analog Output Module.
DVP Slim Series PLC.
Analog output module, 4 AO.
Language: Multilanguage.
Read more
The Text Display 200 (TD 200) is a text display and operator interface for the S7-200 family of programmable logic controllers. This manual uses the terms programmable logic controller and S7-200 CPU (or CPU) interchangeably.
Read more
***Spare part*** SIMATIC S7-200, CPU 222 Compact unit, DC power supply 8 DI DC/6 DO DC 4 KB progr./2 KB data, PROFIBUS DP expandable
Read more
The Delta VFD-E AC Drive is a Sensorless Vector frequency inverter. The VFD-E series represent Delta Electronics' low power, constant torque, and IP20-rated AC Drive. Modular in design with flexible extension cards and a built-in PLC function, the Delta VFD-E AC Drive offers the ability to write and execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.
Power: 2.2kW
Amps: 5.5
Supply: Three Phase 400v
Model: Delta VFD022E43A
Filter: Built-In
Performance: Mid Range
Dimensions: 100 x 174 x 152
Weight: 1.9kg
Read more
SIMATIC S7-1500, CM PTP RS422/485 BA Communication module for Serial connection RS422,RS485 Freeport, 3964 (R), USS, 19200 Kbit/s, 15-Pin D-sub socket.
Read more
Temp Control, 1/4 DIN, Zone PID, RS485, 100-240VAC; Fixed Control, 4 Alarm, Current/SSR Drive Out1&2, 1 CT+3 Digital Input,
Read more
*** spare part *** SIMATIC HMI KTP600 Basic Color DP, Basic Panel, key/touch operation, 6" TFT display, 256 colors, MPI/PROFIBUS DP interface, configurable as of WinCC flexible 2008 SP2 Compact/ WinCC Basic V11/ STEP 7 Basic V11, contains open-source software, which is provided free of charge see enclosed CD.
Read more
- Housing: Standard design.
- Sensing range Sn: 6 mm.
- Installation type: Quasi-flush.
- Electrical wiring: DC 3-wire.
- Switching output: PNP.
- Output function: NO.
- Connection type: Male connector M12, 4-pin.
Eaton Bussmann series 15149 fused pullout switch, 600V, 0-30A, 200 kAIC, Fusible, Dead Front, Three-pole.
Read more
Core features
- Available in NEMA 1, 3R, 4, 4X, 12 enclosures for a broad range of application environments.
- Most common disconnect switches in stock and ship within 24 hours with QuikShip Everyday Service to meet project requirements.
- Multiple field-installed accessories enhance the enclosed disconnect switches to fit the desired application.
- UL 508 Listed for motor disconnect applications.
- 3- and 6-Pole UL 508 motor disconnect switches provide flexibility for single or dual motor applications.
- NEMA 4X 30A and 60A motor control disconnects.
Eaton Bussmann series CCP compact circuit protector, Compact Circuit Protector, 30 A, Single-pole, 20 lb-in, Class G, Screw with pressure plate, Front panel, 240 V.
Read more
***Spare part*** SIMATIC S7-200, CPU 224 Compact unit, DC power supply 14 DI DC/10 DO DC, 8/12 KB program./8 KB data, PROFIBUS DP expandable.
Read more
Pressure sensor for neutral and slightly aggressive liquids and gases (0…10 V) 0…4 bar.
• High-precision measuring.
• Measuring range 0 to 60 bar relative.
• Supply voltage AC 24 V / DC 12...33 V or DC 7…33 V.
• DC 0 ...10 V or DC 4…20 mA output signal.
• Measurement unaffected by changes in temperature.
• High-temperature stability.
• Connection: external thread G ½", inside thread M5.
• Maintenance-free thanks to outstanding long-term stability.
• High overload resistance.
• Robust and compact construction.
Read more
E1.2
E1.2 offers 1600A with breaking capacity up to 66kA and withstand current up to 50kA for 1 second. Switchgears of 66kA can be designed in units of 400mm, which are essential in places with reduced dimensions available, such as in naval and offshore installations.
E2.2
E2.2 enables ratings up to 2500A to be achieved in switchgears with a width of 400mm. In addition, it provides short-circuit currents up to 100kA and withstand current of 85kA for 1 second.
E4.2
E4.2 is the 4000A circuit-breaker designed for high short-circuit capacity and withstand currents up to 100kA for 1 second.
E6.2
E6.2 is the top of the range model with a breaking capacity up to 150kA and a structure that allows 6300A to be reached in the switchgear, even in complex installation conditions.
Read more
• Pressure-linear characteristic with selectable pressure measuring range.
• Operating voltage AC 24 V or DC 13.5…33 V.
• Output signal DC 0...10 V.
• Zero-point adjustment.
• Simple and fast mounting thanks to integrated mounting brackets in the housing.
• Maintenance free.
• Calibrated and temperature-compensated measuring signal.
• Supplied with tubing connection set.
Read more
System pro M compact®
With System pro M compact® ABB offers an extra-wide and complete range of miniature circuit breakers to cover most applications and markets. Our products are compliant to worldwide product standards (IEC, UL, CSA). With over 90 years of experience of innovation in the electrical sector, we offer established and certified quality.- Compliant to worldwide product standards (IEC, UL, CSA)
- Characteristics: B, C, D, K, Z
- Configurations: 1P, 1P+N, 2P, 3P, 3P+N, 4P
- Breaking capacities up to 25 kA
- Rated currents up to 100 A
LOGO! 24RCE, logic module,display PS/I/O: 24V AC/DC 24V/relay, 8 DI/4 DQ, memory 400 blocks, modular expandable, Ethernet, integrated web server, data log, user-defined web pages, standard microSD card for LOGO! Soft Comfort V8.3 or higher, older projects executable cloud connection in all LOGO! 8.3 basic units.
Read more
SIRIUS, COMPACT STARTER, DIRECT STARTER. 690 V, 24 V DC, 3 ... 12 A, IP20, CONN. MAIN CIRCUIT: SCREW TERMINAL, CONN. CONTROL CIRCUIT: SCREW TERMINAL.
Read more
- LOGO DM8 24R expansion module.
- Voltage supply inputs: 24 V AC/DC.
- Outputs: relay.
- 4 DI (Digital Inputs).
- 4 DO (Digital Outputs).
- NPN input.
- For LOGO 8.
MODEL :-GA70C4002BBA.
Read more
The new adaptable Yaskawa AC drive for industrial applications is the GA700. Its adaptability, compact size, and built-in features enable a seamless integration into almost any application. Clever features that help during setup and troubleshooting to save time include the Startup Wizard, data recording, the DriveWizard Mobile app, and many others.
With over 1,000,000 installed and working elevator drives, Yaskawa has demonstrated its success in producing and providing drives to the elevator business. A dedicated drive for elevator applications, the L1000A Drive Series is appropriate for both new installations and renovation work.
Compact V/f Control Drive
Models:-
200 V Class, Three-Phase Input: 0.1 to 5.5 kW.
200 V Class, Single-Phase Input: 0.1 to 2.2 kW.
400 V Class, Three-Phase Input: 0.2 to 5.5 kW.
Read more
Compact Vector Control Drive
Models:-
200 V Class, Three-Phase Input: 0.1 to 18.5 kW
200 V Class, Single-Phase Input: 0.1 to 3.7 kW
400 V Class, Three-Phase Input: 0.2 to 18.5 kW
Read more
Models:-
200 V Class: 0.4 to 110 kW (3/4 to 175 HP ND)
400 V Class: 0.4 to 630 kW (3/4 to 1000 HP ND)
600 V Class: 0.75 to 185 kW (1 to 250 HP ND)
Read more
- Diffusing signals without loss.
- The transformation of SinCos to digital.
- 4 simultaneous output signals, maximum.
AC500
ABB offers a dependable and potent platform for designing and building scalable, affordable, and adaptable automation solutions with the AC500 PLC line.
Read more
For industrial and commercial electricians, the Fluke 376 FC True-RMS
Clamp Meter with iFlex is the most sophisticated diagnostic instrument available.
The 376 is a member of the Fluke Connect series of wireless test equipment,
which uses Bluetooth connectivity to let you log, trend,
and monitor measurements while staying securely outside the arc flash zone.
Read more
Features-
♦ Impulse counter.
♦ Adding.
♦ Display 6- or 8-digits.
♦ With or without a reset button.
♦ Socket housing.
Read more
Applications
■ Calibration service companies and service industry.
■ Measurement and control laboratories.
■ Pressure tests.
Special features
■ Digital indicator with interchangeable pressure sensors (plug-and-play).
■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi].
■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure.
■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate).
■ Data logger for recording measured values.
Read more
- In order to ensure quality, completeness, position, and existence.
- Verification of contours without regard to orientation.
- Independent gadget with built-in lighting.
- User-friendly, intuitive handling.
- An Ethernet interface with high throughput for data transmission.
EV220B 15-50 are a universal indirect servooperated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adjustable closing time and enclosures up to IP67 ensures optimal performance even under critical working conditions.
Read more
Product ID: 750105.
PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/
without detection of shorts across contacts, manual/automatic start,
outputs: 2 N/O, 2 N/O t-d (t = 0.04 - 300 s), 1 SC, UB = 24 V DC, width:
22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light
curtain.
Read more
- Dual color indication LED.
- High switching frequency.
- Light-on/dark-on, programmable.
- Strong metallic housing in cylindrical shape M18 x 1.
- Degree of protection IP67.
The CP-9302-702 electronic actuator drive processes a variable input signal from a controller to provide proportional control of an electric actuator. The CP-930-702 is preset for current input (4 - 20 mA) and has additional wiring for connection to an override switch for applications requiring an external override of the input signal. The CP-9302-702 is equipped with built-in jumpers and adjustable potentiometers, so that the type of input signal, deadband, input span, and start point may be readjusted in the field when necessary.
Read more
SIEMENS Simatic S7-200 Smart PLC is made to specifically meet the needs of emerging markets that are always being squeezed by costs and demands for consistent performance. When paired with other Siemens Smart drive solutions, the Simatic S7-200Smart, which offers a great performance-to-price ratio, aids in creating a highly affordable yet effective automation solution.
Read more
The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.