Description

Mean Well Power Supply NSP-3200-24

Power Supply

OUTPUT

• DC Voltage: 24V

• Rated Current: 133A

• Current Range: 0 ~ 133A

• Rated Power: 3192W

• Ripple & Noise (Note 2, 3): 300mVp-p

• Voltage Adj. Range: 23.5 ~ 30V

• Voltage Tolerance (Note 4): ±1.0%

• Line Regulation: ±0.5%

• Load Regulation: ±0.5%

• Setup, Rise Time: 1500ms, 60ms / 230VAC at full load

• Hold Up Time (Typ.): 16ms / 230VAC at 70% load, 8ms / 230VAC at full load

INPUT

• Voltage Range (Note 5): 90 ~ 264VAC / 127 ~ 400VDC

• Frequency Range: 47 ~ 63Hz

• Power Factor (Typ.): 0.97 / 230VAC at full load

• Efficiency (Typ.): 93.5%

• AC Current (Typ.): 17A / 230VAC

• Inrush Current (Typ.): Cold Start 55A / 230VAC

• Leakage Current: <2mA / 230VAC

PROTECTION

• Overload:
  105 ~ 115% rated output power

  • Protection Type: Constant current limiting, shut down O/P voltage 5 sec. after O/P voltage is down low, re-power on to recover

• Over Voltage: 63 ~ 75V

  • Protection Type: Shut down O/P voltage, re-power on to recover

• Over Temperature:
  Shut down O/P voltage, recovers automatically after temperature goes down

FUNCTION

• Output Voltage Programmable (PV):
  Adjustment of output voltage is allowable to 50 ~ 125% of nominal output voltage

  • Please refer to the Function Manual in following pages

• Remote ON-OFF Control:
  By electrical signal or dry contact

  • Power ON: short / Power OFF: open

  • Refer to the Function Manual in following pages

• Remote Sense:
  Compensates voltage drop on the load wiring up to 0.5V

  • Refer to the Function Manual in following pages

• Auxiliary Power: 12V @ 0.8A, tolerance ±10%

• Alarm Signal:
  Isolated TTL signal output for T-Alarm and DC-OK

  • Refer to the Function Manual in following pages

ENVIRONMENT

• Working Temp.: -20 ~ +70°C (Refer to “Derating Curve”)

• Working Humidity: 20 ~ 90% RH non-condensing

• Storage Temp., Humidity: -40 ~ +85°C, 10 ~ 95% RH non-condensing

• Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)

• Vibration: 10 ~ 500Hz, 2G 10min./cycle, 60min. each along X, Y, Z axes

Data Sheet: PDF