Siemens Analog Output Module 6ES7-135- 4GB01-0AB0
Add to Wishlist
Add to Wishlist
SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Description
Siemens Analog Output Module 6ES7-135- 4GB01-0AB0
Siemens Analog Output Module
General information |
|||
Product function |
|||
| ● Isochronous mode | No | ||
| Supply voltage | |||
| Load voltage L+ | Load voltage L+ | ||
| ● Rated value (DC) | 24 V; From power module | ||
| ● Reverse polarity protection | Yes | ||
| Input current | |||
| from load voltage L+ (without load), max. | 150 mA | ||
| from backplane bus 3.3 V DC, max. | 10 mA | ||
| Power loss | |||
| Power loss, max. | 2 W | ||
| Address area | |||
| Address space per module | |||
| ● Address space per module, max. | 4 byte | ||
| Analog outputs | |||
| Number of analog outputs | 2 | ||
| Current output, no-load voltage, max. | 18 V | ||
| Cycle time (all channels) max. | 1.5 ms | ||
| Output ranges, current | |||
| ● -20 mA to +20 mA | Yes | ||
| ● 4 mA to 20 mA | Yes | ||
| Connection of actuators | |||
| ● for current output two-wire connection | Yes | ||
| ● for current output four-wire connection | No | ||
| Load impedance (in rated range of output) | |||
| ● with current outputs, max. | 500 Ω | ||
| ● with current outputs, inductive load, max. | 1 mH | ||
| Destruction limits against externally applied voltages and currents | |||
| ● Voltages at the outputs towards MANA | 15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20) | ||
| ● Current, max. | 50 mA; DC | ||
| Cable length | |||
| ● shielded, max. | 200 m | ||
| Analog value generation for the outputs | |||
| Integration and conversion time/resolution per channel | |||
| ● Resolution with overrange (bit including sign), max. | 14 bit; 4 to 20 mA: 13 bit, ±20 mA: 14 bit | ||
| Settling time | |||
| ● for resistive load | 0.1 ms | ||
| ● for capacitive load | 0.5 ms | ||
| ● for inductive load | 0.5 ms | ||
| Errors/accuracies | |||
| Operational error limit in overall temperature range | |||
| ● Current, relative to output range, (+/-) | 0.5 % | ||
| Basic error limit (operational limit at 25 °C) | |||
| ● Current, relative to output range, (+/-) | 0.3 % | ||
| Interrupts/diagnostics/status information | |||
| Diagnoses | |||
| ● Diagnostic information readable | Yes | ||
| ● Wire-break | Yes | ||
| ● Group error | Yes | ||
| Diagnostics indication LED | |||
| ● Group error SF (red) | Yes | ||
| Parameter | |||
| Remark | 7 byte | ||
| Diagnostics wire break | Disable / enable | ||
| Group diagnostics | Disable / enable | ||
| Response to CPU/master STOP | Output current and de-energized/substitute a value/keep last value | ||
| Potential separation | |||
| Potential separation analog outputs | |||
| ● between the channels | No | ||
| ● between the channels and backplane bus | Yes | ||
| ● Between the channels and load voltage L+ | Yes | ||
| Isolation | |||
| Isolation tested with | 500 V DC | ||
| Dimensions | |||
| Width | 15 mm | ||
| Height | 81 mm | ||
| Depth | 52 mm | ||
| Weights | |||
| Weight, approx. | 40 g | ||
Related products
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.