Description

OPTICAL DISTANCE SENSOR ODS 9L1.8/LAK-650-M12

General information

The laser distance sensor is an optical distance sensor that operates according to the triangulation measurement principle.

The sensor consists of the following components:

• Transmitter: laser spot.
• Receiver.
• White OLED display.
• Control panel with control buttons.
• Status LEDs.
• Connection for connecting to the control: M12 connector The sensor can be configured using display and control.

With the Sensor Studio configuration software, the sensors can be configured via the IO-Link interface with a PC, and the measurement values visualized.

Stored parameter sets can be duplicated in other sensors. The connection is made via the IO-Link USB master, which is available as an accessory.

• Operating principle

Triangulation measurement principle

Distance measuring procedure, which determines the distance of an object by the incidence angle of the light reflected from the object.

Advantages of the triangulation measurement principle:-

• Short response times and, thus, high measurement rates.
• High accuracy.

OPTICAL DISTANCE SENSOR ODS 9L1.8/LAK-650-M12

Performance characteristics:-

The most important performance characteristic of the ODS 9 laser distance sensor:

• Measurement ranges:

50 mm … 1050 mm against objects (6 … 9% diffuse reflection)

• Analog current and voltage output (configurable) Factory setting: current output
• OLED display and control buttons for configuration
• Configurable measurement range and measure mode
• Measurement value display in mm on the OLED display
• IO-Link version 1
  • Compliant with the “Smart Sensor Profile” specification
  • Dual Channel: the IO-Link interface can be used in parallel with the other output
• Communication interface RS 232/RS 485, depending on the device type
• Optional: multifunction input for deactivating the laser or for teaching the digital switching points (teach-in)

OPTICAL DISTANCE SENSOR ODS 9L1.8/LAK-650-M12

Factory setting: input for deactivating the laser

• Optional: second switching output if the IO-Link interface is not used For measurement against objects:
• Measurement range: 50 mm … 1050 mm, dependent on device type.
• Measurement against diffusely reflective objects.
• Reflection-independent distance information.
• Applications:-
  • Distance measurement.
  • Contour determination.
  • Thickness measurement.
  • Positioning.
  • Diameter determination.
  • Sag determination.
  • Stack height measurement.
  • Loop measurement.