Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Functional principle: Diffuse reflective
- Sensing range: 1 to 30 mm
- Connection type: M8 4-pin plug
- Output Type: NPN
- Operation mode: Light ON
For Price Call: 01329727092
Email: sales@voltecbd.com
- Functional principle: Through-beam
- Sensing range: 500 mm
- Connection type: M8 4-pin plug
- Output Type: PNP
- Operation mode: Light ON
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 25 mm
- Connection type: M12 connector
- Switching frequency: 100 Hz
- Installation type: Non Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Operation distance_OFF→ON: ± 10 mm
- Operation distance_ON→OFF: ± 20 mm
- Output function: NO
- Operating frequency: 500 Hz
- Switching voltage: ≤ 24VDC
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 12 mm
- Connection type: Cable type
- Switching frequency: 50 Hz
- Installation type: Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 8 mm
- Switching Output: PNP
- Output function: NO
- Switching frequency: 50 Hz
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 15 mm
- Connection type: M12 Connector cable
- Output function: NC
- Switching frequency: 20 Hz
- Installation type: Non Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 12 mm
- Connection type: M12 plug connector
- Switching output: PNP
- Output function: NO
- Switching frequency: 10 Hz
- Installation type: Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Applicable fluid : (Pneumatic type) Air, Non-corrosive gas
- Pressure port direction : Rear fitting
- Pressure port : Rc1/8
- Connection type : Connector type(connector type cable: 2m)
- Pressure type : Standard pressure
- Power voltage : 12-24VDC
±10%(ripple P-P: max. 10%)
- Current consumption : Voltage output type: Max. 50mA Current output type: Max. 75mA
- Protection structure : IP40
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing type : Through-beam type
- Sensing distance : 30m
- Sensing target : Opaque material of min. Ø15mm
- Light source : Red LED(660nm)
- Response time : Max. 1ms
- Measured materials : Liquid, gas, oil
- Measurement pressure : Gauge pressure
- Pressure range : 0 to 10kgf/cm²
- Device type: Transmitter
- Operating range: 0… 25 m
- Thread size: M12
- Type: Male
- Material: PUR
- No. of pins: 4 -pin
- Device type: Transmitter
- Operating range: 0.05 … 8.5 m
- Thread size: M8
- Type: Male
- Material: Metal
- No. of pins: 4 -pin
- Device type: Receiver
- Operating range: 0.5 ... 120 m
- Switching element: PNP
- Switching principle: Light/Dark switching
- Thread size: M12
- Type: Male
- Material: Plastic
- No. of pins: 4 -pin
- Operating range: 0.5 ... 120 m
- Operating range limit: 0 ... 150 m
- Thread size: M12
- Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
- Open-circuit current: 0 ... 20 mA
- Readiness delay: 300 ms
- Maximum image quality is achieved with integrated testo SuperResolution Technology at 640 x 480 pixels and IR resolution of 320 x 240 pixels.
- Thermal sensitivity of 0.05°C for precise measurement.
- Clever and wireless, the testo 770-3 clamp meter and the testo 605i humidity measuring equipment can wirelessly send readings using your mobile device and the free testo Thermography App (both available separately).
- Integrated laser marker - can also be precisely seen in the thermal image as a measuring point.
TCN4S-24R
- Display method : 4-digit 7-segment LED
- Control method : ON/OFF, P, PI, PD, PID
- Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC) RTD: DPt100Ω, Cu50Ω
- Sampling cycle : 100ms
- Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
- Power supply : 100-240VAC~ 50/60Hz
- Display method : 4-digit 7-segment LED.
- Control method : ON/OFF, P, PI, PD, PID.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II. RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω. Analog: 0-100mV, 0-5V, 1-5V, 0-10V. 0-20mA, 4-20mA.
- Sampling cycle : 50ms.
- Control output 1 : Current(DC0/4-20mA) or SSR drive(11VDC
) [ON/OFF].
- Option output : Alarm 1, RS485 comm.
- Power supply : 100-240VAC~ 50/60Hz.
- Protection structure : IP65(front panel).
- Display method: 4-digit 7-segment LED.
- Control method: ON/OFF control, P, PI, PD, PIDF, PIDS control.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), R(PR), S(PR), N(NN), W(TT) RTD: DPt100Ω, JPt100Ω
- Analog: 1-5VDC , 0-10VDC , DC4-20mA..
- Sampling cycle: 500ms.
- Control output : Relay(250VAC~ 3A).
- Power supply : 100-240VAC~ 50/60Hz.
SFB Technology (Selective Fuse Breaking), Screw connection, DIN rail mounting, Primary-switched Power Supply Unit by QUINT POWER, Input: 1-Phase, Output: 24 V DC / 20 A.
Read more
Temp Control, 1/4 DIN, Zone PID, RS485, 100-240VAC; Fixed Control, 4 Alarm, Current/SSR Drive Out1&2, 1 CT+3 Digital Input,
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.





















