Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Functional principle: Diffuse reflective
- Sensing range: 1 to 30 mm
- Connection type: M8 4-pin plug
- Output Type: NPN
- Operation mode: Light ON
For Price Call: 01329727092
Email: sales@voltecbd.com
- Functional principle: Through-beam
- Sensing range: 500 mm
- Connection type: M8 4-pin plug
- Output Type: PNP
- Operation mode: Light ON
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 25 mm
- Connection type: M12 connector
- Switching frequency: 100 Hz
- Installation type: Non Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Operation distance_OFF→ON: ± 10 mm
- Operation distance_ON→OFF: ± 20 mm
- Output function: NO
- Operating frequency: 500 Hz
- Switching voltage: ≤ 24VDC
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 12 mm
- Connection type: Cable type
- Switching frequency: 50 Hz
- Installation type: Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 8 mm
- Switching Output: PNP
- Output function: NO
- Switching frequency: 50 Hz
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 15 mm
- Connection type: M12 Connector cable
- Output function: NC
- Switching frequency: 20 Hz
- Installation type: Non Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensing range (max.): 12 mm
- Connection type: M12 plug connector
- Switching output: PNP
- Output function: NO
- Switching frequency: 10 Hz
- Installation type: Flush
For Price Call: 01329727092
Email: sales@voltecbd.com
- Applicable fluid : (Pneumatic type) Air, Non-corrosive gas
- Pressure port direction : Rear fitting
- Pressure port : Rc1/8
- Connection type : Connector type(connector type cable: 2m)
- Pressure type : Standard pressure
- Power voltage : 12-24VDC
±10%(ripple P-P: max. 10%)
- Current consumption : Voltage output type: Max. 50mA Current output type: Max. 75mA
- Protection structure : IP40
For Price Call: 01329727092
Email: sales@voltecbd.com
- Sensor principle: Delta‑S‑Technology®
- Switching output: Push‑pull: PNP/NPN
- Switching output (voltage): Push‑pull: PNP/NPN (High: VS − 3 V, Low: < 3 V)
- Light source: LED, visible red light
- Light spot size: 10 mm × 12 mm
- Wavelength: 640 nm
- Sensing distance:
- Sensing type : Through-beam type
- Sensing distance : 30m
- Sensing target : Opaque material of min. Ø15mm
- Light source : Red LED(660nm)
- Response time : Max. 1ms
- Measured materials : Liquid, gas, oil
- Measurement pressure : Gauge pressure
- Pressure range : 0 to 10kgf/cm²
- Device type: Transmitter
- Operating range: 0… 25 m
- Thread size: M12
- Type: Male
- Material: PUR
- No. of pins: 4 -pin
- Device type: Transmitter
- Operating range: 0.05 … 8.5 m
- Thread size: M8
- Type: Male
- Material: Metal
- No. of pins: 4 -pin
- Device type: Receiver
- Operating range: 0.5 ... 120 m
- Switching element: PNP
- Switching principle: Light/Dark switching
- Thread size: M12
- Type: Male
- Material: Plastic
- No. of pins: 4 -pin
- Operating range: 0.5 ... 120 m
- Operating range limit: 0 ... 150 m
- Thread size: M12
- Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
- Open-circuit current: 0 ... 20 mA
- Readiness delay: 300 ms
- Position control type
- 50 W to 400 W
- Input power supply for Driver: Voltage AC 100 V/200 V
- 2500 p/r incremental encoder
- Frequency response 400 Hz
CX-411, CX-412, CX-413, CX-491, CX-493, CX-481, CX-483, CX-482, CX-424, CX-421, CX-422, CX-423, CX-441, CX-443, CX-444, CX-442, CX-411-P, CX-412-P, CX-413-P, CX-491-P, CX-493-P, CX-481-P, CX-483-P, CX-482-P, CX-424-P, CX-421-P, CX-422-P, CX-423-P, CX-441-P, CX-443-P, CX-444-P, CX-442-P, CX-411A-C05, CX-411B-C05, CX-412A-C05
Read more
Panasonic Servo Drives MCDJT3220
Electrical drives are integral part of industrial and automation processes, particularly where precise control of speed of the motor is the prime requirement. In addition, all modern electric trains or locomotive systems have been powered by electrical drives. Robotics is another major area where adjustable speed drives offer precise speed and position control.
MADCT1505, MBDCT1505, MBDCT2507, MCDCT3512, MDDCT5516, MADCT1505, MBDCT1505, MBDCT2507, MCDCT3512, MDDCT5516, MADCT1103
MBDCT1103, MADCT1103, MBDCT1103, MADCT1105, MBDCT1107, MBDCT2107, MCDCT3112, MADCT1503, MBDCT1503, MADCT1503, MBDCT1503
MADCT1503, MBDCT1503, MADCT1505, MBDCT1507, MBDCT2507, MDDCT5512, MADCT1503, MBDCT1503, MADCT1503, MBDCT1503, MADCT1503
MBDCT1503, MADCT1505, MBDCT1507, MBDCT2507, MCDCT3312, MDDCT5512, MDDCT5316, MEDCT5316, MDDCT5325, MEDCT5325, MFDCT7333
MFDCT7333, MGDCTA350, MGDCTB375, MGDCTB375, MGDCTB375, MGDCTB375, MDDCT5512 , MDDCT5512, MEDCT5312, MEDCT5316, MDDCT5316
Read more
TCN4S-24R
- Display method : 4-digit 7-segment LED
- Control method : ON/OFF, P, PI, PD, PID
- Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC) RTD: DPt100Ω, Cu50Ω
- Sampling cycle : 100ms
- Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
- Power supply : 100-240VAC~ 50/60Hz
- Display method : 4-digit 7-segment LED.
- Control method : ON/OFF, P, PI, PD, PID.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II. RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω. Analog: 0-100mV, 0-5V, 1-5V, 0-10V. 0-20mA, 4-20mA.
- Sampling cycle : 50ms.
- Control output 1 : Current(DC0/4-20mA) or SSR drive(11VDC
) [ON/OFF].
- Option output : Alarm 1, RS485 comm.
- Power supply : 100-240VAC~ 50/60Hz.
- Protection structure : IP65(front panel).
- Display method: 4-digit 7-segment LED.
- Control method: ON/OFF control, P, PI, PD, PIDF, PIDS control.
- Input specification : Thermocouple: K(CA), J(IC), E(CR), T(CC), R(PR), S(PR), N(NN), W(TT) RTD: DPt100Ω, JPt100Ω
- Analog: 1-5VDC , 0-10VDC , DC4-20mA..
- Sampling cycle: 500ms.
- Control output : Relay(250VAC~ 3A).
- Power supply : 100-240VAC~ 50/60Hz.
Temp Control, 1/4 DIN, Zone PID, RS485, 100-240VAC; Fixed Control, 4 Alarm, Current/SSR Drive Out1&2, 1 CT+3 Digital Input,
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.























