Siemens Sitop PSU100S Power Supply 6EP1334-2BA20

SITOP PSU100S 24 V/5 A

Description

Siemens Sitop PSU100S Power Supply 6EP1334-2BA20

DIN RAIL POWER SUPPLY

TECHNICAL DATA SHEET

Input

Input		1-phase AC
	Supply voltage
● 1 at AC Rated value		120 V
● 2 at AC Rated value		230 V
● Note		Automatic range selection
	Input voltage
● 1 at AC		85 … 132 V
● 2 at AC		170 … 264 V
Wide-range input		No
Overvoltage resistance		2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.		20 ms; at Vin = 93/187 V
Rated line frequency 1		50 Hz
Rated line frequency 2		60 Hz
Rated line range		47 … 63 Hz
	Input current
● at rated input voltage 120 V		2.34 A
● at rated input voltage 230 V		1.36 A
Switch-on current limiting (+25 °C), max.		40 A

I²t, max.	1 A²·s
Built-in incoming fuse	T 3,15 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 6 A characteristic C

Output

Output		Controlled, isolated DC voltage
Rated voltage Vout DC		24 V
Total tolerance, static ±		3 %
Static mains compensation, approx.		0.1 %
Static load balancing, approx.		1 %
Residual ripple peak-peak, max.		150 mV
Residual ripple peak-peak, typ.		30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)		240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)		140 mV
Adjustment range		22.8 … 28 V
Product function Output voltage adjustable		Yes
Output voltage setting		via potentiometer
Status display		Green LED for 24 V OK
Signaling		Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior		Overshoot of Vout < 3 %
Startup delay, max.		0.3 s
Voltage rise, typ.		15 ms
Rated current value Iout rated		5 A
Current range		0 … 6 A
● Note		6 A up to +45°C; +60 … +70 °C: Derating 1.6%/K
Supplied active power typical		144 W
	Short-term overload current
● on short-circuiting during the start-up typical		18 A
● at short-circuit during operation typical		18 A
Duration of overloading capability for excess current
● on short-circuiting during the start-up		800 ms
● at short-circuit during operation		800 ms
Parallel switching for enhanced performance		Yes
Numbers of parallel switchable units for enhanced performance		2

Efficiency

Efficiency at Vout rated, Iout rated, approx.	88 %
Power loss at Vout rated, Iout rated, approx.	16 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.	0.3 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %

MORE INFO:-PDF