Filter
Sort:
Show:
SICK Contrast Sensor KT5W-2N1116, 1018045

SICK Contrast Sensor KT5W-2N1116, 1018045

 
  • Switching Output: NPN
  • Supply Voltage: 10 V DC … 30 V DC
  • Ripple: ≤ 5 Vpp
  • Current Consumption: < 80 mA
  • Switching Frequency: 10 kHz
  • Response Time: 50 µs
Read more
SICK Contrast Sensor KT5W-2P1116, 1018044

SICK Contrast Sensor KT5W-2P1116, 1018044

  • Switching Output: PNP
  • Supply Voltage: 10 V DC ... 30 V DC
  • Ripple: ≤ 5 Vpp
  • Current Consumption: < 80 mA
  • Switching Frequency: 10 kHz
  • Response Time: 50 µs
Read more
ASCO Solenoid Valve 8210G094AC100/60D

ASCO Solenoid Valve 8210G094AC100/60D

Low-cost, high-flow solenoid valves for liquid, corrosive, and air/inert gas applications are part of the ASCO Series 210 series. The extremely reliable 2-way valves offer long service lives and little internal leakage thanks to their wide selection of pressure ratings, sizes, and durable materials. Car wash equipment, air compressors, pumps, laundry equipment, and industrial water control are a few examples of industrial usage.
Read more
ASCO SOLENOID VALVE 210 2-Way

ASCO SOLENOID VALVE 210 2-Way

Specifications Valve Actuation : Solenoid
Body Material : Brass, Stainless Steel, Lead-free Brass, 316 stainless steel on request
Media : Aggressive Liquids/Gases, Air, Inert Gas, Ammonia, Cryogenic, Fuel Oil, Hot Water, Light Oil, Liquid Propane Gas, Natural Gas, Oxygen, Steam, Vacuum, Water
Pipe / Port Size : 1/2 "; 3/8 "; 3/4 "; 1 "; 1 1/4 "; 1 1/2 "; 2 "; 2 1/2 "
Port Type : NPTF, G (ISO 228/1)
Function : 2 way - 2/2 Normally Closed, 2 way - 2/2 Normally Open
Flow : From 1.3 to 39 Kv , 1.5 to 45 Cv
Voltage : 24 AC, 110 AC, 115 AC, 12 DC, 12 to 24 DC Voltage Ranging, 120 AC, 120 DC, 125 DC Battery Charging, 208 AC, 220 AC, 230 AC, 24 DC, 24 to 120 AC/DC Voltage Ranging, 240 AC, 240 DC - 50/60, Uncommon voltages available upon request.
Max Differential / Max Operating Pressure: Vacuum to 24 bar, Vacuum to 350 psi
Operating Environment : Corrosive, Hazardous, Indoor, Outdoor
Read more
CAMILLE BAUER KINAX N702 Inclination Transmitter

CAMILLE BAUER KINAX N702 Inclination Transmitter

An angle proportional inclination is transformed into a DC signal using the KINAX N702. 
An analog current change (4–20 mA) that represents the output signal is accessible. 
There is little mechanical wear on the pendulum from the sensor, which is non-contact.

Features:-

  • Magnetoresistive inclination transducer
  • Digital interfaces CANopen
  • Robust aluminum housing
  • Protection class IP66
  • Oil damped pendulum
  • Pendulum shaft without mechanical stop
Read more
Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Product ID: 751102. PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.
Read more
Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

PNOZsigma contact expansion, outputs: 4 N/O, 1 N/C, UB 24 V DC, width: 17.5 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.
Read more
PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

Product ID: 750105. PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 2 N/O, 2 N/O t-d (t = 0.04 - 300 s), 1 SC, UB = 24 V DC, width: 22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light curtain.
Read more

Filter Products

Categories