Showing all 12 resultsSorted by latest

Sort:

Show:

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000

WATSON MARLOW 700 SERIES CASED PUMP

Technical Summary:

Max. flow rate	3300 L/h
Min. flow rate	0.12 L/h
Max. flow rate	872 USGPH
Min. flow rate	0.03 USGPH
Drive speed control ratio	3600:1
Operating temperature range	5 to 40 °C
Operating temperature range	40 to 104 °F
Control types	EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS485, SCADA
Drive standards	CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements)
Drive ingress rating	IP66, NEMA 4X
Drive power supply	100-120 V/200-240 V 1ph 50/60 Hz 350 VA
Compatible tubing bore size	9.6, 12.7, 15.9, 19, 25.4 mm

WATSON MARLOW 600 SERIES CASED PUMP

Technical Summary

Max. flow rate	18 L/min
Min. flow rate	0.001 L/min
Max. flow rate	301 USGPH
Min. flow rate	0.02 USGPH
Drive speed control ratio	2650:1
Operating temperature range	5 to 40 °C
Operating temperature range	41 to 104 °F
Control types	EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA
Drive standards	CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements)
Drive ingress rating	IP31, IP66, NEMA 2, NEMA 4X
Drive power supply	100-120 V/200-240 V 1ph 50/60 Hz 250 VA
Compatible tubing bore size

WATSON MARLOW 500 SERIES CASED PUMP

Technical Summary:

Max. flow rate	3500 ml/min
Min. flow rate	0.004 ml/min
Max. flow rate	56 USGPH
Min. flow rate	0 USGPH
Drive speed control ratio	2200:1
Operating temperature range	5 to 40 °C
Operating temperature range	40 to 104 °F
Control types	EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA
Drive standards	CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements), RoHS
Drive ingress rating	IP31, IP66, NEMA 2, NEMA 4X
Drive power supply	115/230 V 1ph 50/60 Hz 135 VA
Compatible tubing bore size	0.5, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm

WATSON MARLOW 300 SERIES CASED PUMP

WATSON MARLOW 300 SERIES CASED PUMP TECHMICAL SUMMERY:

Max. flow rate	3000 ml/min
Min. flow rate	0.002 ml/min
Speed control ratio	133:1, 147:1, 200:1, 27:1, 300:1
Operating temperature range	5 to 40 °C
Operating temperature range	40 to 104 °F
Drive standards	CE, cETLus
Drive ingress rating	IP31
Drive power supply	1ph, 100-120 V, 220-240 V 50/60 Hz, 100 VA
Compatible tubing bore size	0.13, 0.19, 0.25, 0.38, 0.5, 0.63, 0.76, 0.8, 0.88, 1.02, 1.14, 1.29, 1.42, 1.52, 1.6, 1.65, 1.85, 2.05, 2.29, 2.54, 2.79, 3.2, 4.8, 6.4, 8 mm

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

WATSON MARLOW 100 SERIES CASED PUMP

TECHNICAL SUMMERY OF WATSON MARLOW 100 SERIES CASED PUMP:

Max. flow rate	190 ml/min
Min. flow rate	0.0001 ml/min
Max. flow rate	3.04 USGPH
Min. flow rate	0.00002 USGPH
Max. operating pressure	2 bar
Max. operating pressure	30 psi
Speed control ratio	100:1, 1000:1, 200:1, 2000:1, 32:1, 320:1
Operating temperature range	5 to 40 °C
Operating temperature range	40 to 104 °F
Standards	CE, cETLus
Ingress rating	IP31, NEMA 2
Power supply	Supplied with 24 VDC mains transformer plug (range 90-264 VAC 47-63 Hz) which comes with multi-country adaptors