Description

ROTEX 2 Way Normally Close High Pressure Solenoid Valve

High Pressure Solenoid Valve 0-400 BAR

A typical solenoid valve type found in several applications is the two-way solenoid valve. With the aid of valves, fluids may be safely managed and used to their full potential. Such valves must be used in many industrial applications, which call for automation. Solenoid valves are necessary for automating and conveniently utilizing fluids to their greatest potential.Wherever it is necessary for the application to be able to start and stop the flow as needed, a general-purpose 2-way solenoid valve is employed. These valves contain two ports, each of which connects to either the inlet or the outlet, and regulate the flow of fluid through them by using an internal plunger to open or close an orifice. It can be set to either “Usually Open” or “Normally Closed” configuration.When the coil is de-powered, a normally open two-way solenoid valve enables media to pass through its port, and when the coil is energized, a normally closed valve allows media to pass through its port.In addition, solenoid valves can be categorized as direct acting or indirect/pilot operated depending on how the flow orifice is opened and closed.

FEATURES:-

• Bubble tight shut off.

• Mounts in any position.

• Vibration resistance up to 9g.

• Suitable for high speed cycling.

• Speed up to 200 cycles/ min.

• Life > 5 million cycles.

AMBIENT AND FLUID TEMPERATURE-

-20 °C to 80 °C.

SPECIAL VERSION AND SUFFIX-

Suffix : (Valve) AM.

MEDIA-

Air, Inert Gases, Water, Free Flowing Liquids,Oil, Diesel, Kerosene, LPG, CNG.

APPLICATION-

Fuel line Cut OFF, Priority panel, Dispensing.