Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Diameter: Ø 8mm
- Sensing Range Sn : 4mm
- Switching Output: PNP/NC
- Installation Type: Non-flush
- Diameter : Ø 6.5mm
- Sensing Range Sn : 4mm
- Switching Output : NPN/NO
- Installation Type : Non-flush
- Diameter : Ø 18mm
- Sensing Range Sn : 8mm
- Switching Output : NPN/NC
- Installation Type : Flush
- Diameter : Ø 8mm
- Sensing Range Sn : 0 mm ... 4 mm
- Output Function : Analog
- Installation Type : Quasi-flush
- Diameter: Ø 30mm
- Sensing Range Sn : 20mm
- Switching Output: PNP/Complementary
- Installation Type: Non-flush
- Sensing Range Sn: 5mm
- Switching Output: NPN/NO
- Installation Type: Non-flush
- Enclosure Rating: IP67
- Sensing Range Sn: 20mm
- Switching Output: PNP/NO
- Installation Type: Flush
- Enclosure Rating: IP67, IP68, IP69K
- Diameter: Ø 12mm
- Sensing Range Sn : 10mm
- Switching Output: PNP/NO
- Installation Type: Non-flush
- Device type: Receiver
- Operating range: 0.5 ... 120 m
- Switching element: PNP
- Switching principle: Light/Dark switching
- Thread size: M12
- Type: Male
- Material: Plastic
- No. of pins: 4 -pin
- Operating range: 0.5 ... 120 m
- Operating range limit: 0 ... 150 m
- Thread size: M12
- Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
- Open-circuit current: 0 ... 20 mA
- Readiness delay: 300 ms
Trendmaster 200132 Pressure Transducer System - The 200132 sensor was designed to provide static (average) pressure measurements from general process monitoring to the Trendmaster† system. The Bently Nevada Trendmaster Pro online condition monitoring system links hundreds of permanently mounted transducers and measurement points onto a single-cable sensor network and transfers the data into System 1 machine condition monitoring software.
Read more
- Vibration.
- Temperature.
- Seal leaks.
- Pressure.
DIN rail power supplies for 3-phase system 12 V, 8 A
♦ AC 380-480V Wide-range Input.
♦ Input Fuses Already Included.
♦ Requires only Two Legs of a 3-Phase System.
♦ Width only 40mm.
♦ Efficiency up to 85.8%.
♦ Input -Transient Blanking Circuit Included.
♦ Minimal Inrush Current Surge.
♦ Full Power Between -25°C and +60°C.
Read more
- Housing: Standard design.
- Sensing range Sn: 6 mm.
- Installation type: Quasi-flush.
- Electrical wiring: DC 3-wire.
- Switching output: PNP.
- Output function: NO.
- Connection type: Male connector M12, 4-pin.

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.