Filter
Sort:
Show:
Mean Well Power Supply NSP-3200-24

Mean Well Power Supply NSP-3200-24

  • DC Voltage: 24V

  • Rated Current: 133A

  • Current Range: 0 ~ 133A

  • Rated Power: 3200 W

Read more
Mean Well Power Supply NSP-3200-48

Mean Well Power Supply NSP-3200-48

  • DC Voltage: 48V
  • Rated Current: 67A
  • Current Range: 0 ~ 67A
  • Rated Power: 3200W
Read more
MEAN WELL POWER SUPPLY EDR-75 / EDR-120 / EDR-150

MEAN WELL POWER SUPPLY EDR-75 / EDR-120 / EDR-150

Wattage :
75W~480W
Features　:
Metal case, economical models 1∅, full range input Slim size, model width: 32 ~ 85.5mm EMC EN55022 class B Assemble on industrial rail TS-35 / 7.5 or 15
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
BANNER PHOTOELECTRIC SENSOR QS30 SERIES

BANNER PHOTOELECTRIC SENSOR QS30 SERIES

BANNER PHOTOELECTRIC SENSOR QS30 SERIES FEATURES:

  • Innovative 30 mm housing design to suit almost any mounting requirement.
  • High-power sensing with ranges up to 200 m.
  • Available in opposed, high-power opposed, polarized and non-polarized retroreflective, diffuse, laser, fixed-field and adjustable-field and clear object sensing modes.
  • Class 1 visible laser in diffuse and retroreflective models and Class 2 in diffuse models.
  • Models with standard 10 to 30V dc supply voltage and bipolar NPN/PNP outputs or 24 to 250V ac/12 to 250V ac supply voltage with e/m relay output.
  • Light- or dark-operate selectable or configurable, depending on model.
  • IP67 or IP69K environmental rating, depending on model.
  • Bright LED operating status indicators visible from 360°.
Read more
BECKHOFF Communication Module EK1100 EtherCAT Coupler

BECKHOFF Communication Module EK1100 EtherCAT Coupler

The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more

Filter Products

Categories