Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
The space-saving single-cable approach greatly minimizes installation effort, and the servo motor EMMT-AS for demanding and dynamic applications has a very good controllability and route accuracy for positioning jobs.
Read more
- Brushless, synchronous, permanent magnet motor.
- Either a single-turn or multiple-turn digital absolute linear potentiometer.
- High synchronization is supported even at low rotational speeds by an extremely low cogging torque.
- One connecting cable serves as the supply and encoder in simple connection technology (OCP: One Cable Plug).
- Angle-adjustable rotating plug (310°).
- offering a holding brake.
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
SMART Transmitter Power Supply, Output Current Sink
KFD2-STC4-Ex2-Y1
♦ 2-channel isolated barrier.
♦ 24 V DC supply (Power Rail).
♦ Input 2-wire SMART transmitters.
♦ Output 0/4 mA ... 20 mA current sink.
♦ Terminal blocks with test sockets.
♦ Up to SIL 2 acc. to IEC/EN 61508.
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.