Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Diameter: Ø 8mm
- Sensing Range Sn : 4mm
- Switching Output: PNP/NC
- Installation Type: Non-flush
- Diameter : Ø 6.5mm
- Sensing Range Sn : 4mm
- Switching Output : NPN/NO
- Installation Type : Non-flush
- Diameter : Ø 18mm
- Sensing Range Sn : 8mm
- Switching Output : NPN/NC
- Installation Type : Flush
- Diameter : Ø 8mm
- Sensing Range Sn : 0 mm ... 4 mm
- Output Function : Analog
- Installation Type : Quasi-flush
- Diameter: Ø 30mm
- Sensing Range Sn : 20mm
- Switching Output: PNP/Complementary
- Installation Type: Non-flush
- Sensing Range Sn: 5mm
- Switching Output: NPN/NO
- Installation Type: Non-flush
- Enclosure Rating: IP67
- Sensing Range Sn: 20mm
- Switching Output: PNP/NO
- Installation Type: Flush
- Enclosure Rating: IP67, IP68, IP69K
- Diameter: Ø 12mm
- Sensing Range Sn : 10mm
- Switching Output: PNP/NO
- Installation Type: Non-flush
Low-cost, high-flow solenoid valves for liquid, corrosive, and air/inert gas applications are part of the ASCO Series 210 series. The extremely reliable 2-way valves offer long service lives and little internal leakage thanks to their wide selection of pressure ratings, sizes, and durable materials. Car wash equipment, air compressors, pumps, laundry equipment, and industrial water control are a few examples of industrial usage.
Read more
Specifications
Valve Actuation : Solenoid
- Body Material : Brass, Stainless Steel, Lead-free Brass, 316 stainless steel on request
- Media : Aggressive Liquids/Gases, Air, Inert Gas, Ammonia, Cryogenic, Fuel Oil, Hot Water, Light Oil, Liquid Propane Gas, Natural Gas, Oxygen, Steam, Vacuum, Water
- Pipe / Port Size : 1/2 "; 3/8 "; 3/4 "; 1 "; 1 1/4 "; 1 1/2 "; 2 "; 2 1/2 "
- Port Type : NPTF, G (ISO 228/1)
- Function : 2 way - 2/2 Normally Closed, 2 way - 2/2 Normally Open
- Flow : From 1.3 to 39 Kv , 1.5 to 45 Cv
- Voltage : 24 AC, 110 AC, 115 AC, 12 DC, 12 to 24 DC Voltage Ranging, 120 AC, 120 DC, 125 DC Battery Charging, 208 AC, 220 AC, 230 AC, 24 DC, 24 to 120 AC/DC Voltage Ranging, 240 AC, 240 DC - 50/60, Uncommon voltages available upon request.
- Max Differential / Max Operating Pressure: Vacuum to 24 bar, Vacuum to 350 psi
- Operating Environment : Corrosive, Hazardous, Indoor, Outdoor
The 2704 is a single, two, or triple-loop format process controller that is extremely accurate and stable. Setpoint programming and a wide range of arithmetic and logic functions are included.
Read more
The GWA-250-U0 dual limit value switch enables the parallel configuration of up to two switching
levels for continuous measurements without the installation of extra measurement equipment.
♦ The key coding switch allows for the simplest switching point change.
♦ Switchable input.
♦ Powering integrated converters.
Read more
Galvanic isolation, universal signal converter, and standard signal conversion.
♦ Installing is simple.
♦ Power supply that is universal.
♦ 3x isolated galvanic.
Read more
Pipe installation data logger with GSM data transmission, powered by a battery or an AC adapter.
♦ Installing in a 2" tube.
♦ Safety overflow.
♦ Using the most effective source for communication.
Read more
Hydrostatic level measurement using a level sensor with a 22mm diameter and a capacitive ceramic measuring cell
with an RS485 Modbus-RTU output signal.
♦ Reliable and efficient ceramic cell.
♦ Possible integrated temperature measurement.
♦ Low consumption of energy.
Read more
Independent data logger and IOT Gateway
♦Power supply options come in a variety of forms. ♦Using the most effective source for communication. ♦with up to 7 sensors and 12 measurement types. Pressure transmitter/pressure switch for typical applications with data memory Monitoring of gases, vapors, liquids, and dust at absolute or relative pressures.
With ceramic front-flush or internal diaphragm
With TFT-display, 4-20mA or 0-10V output and up to 4 pnp switching outputs.
♦ Color display and full text programming.
♦ Ceramic cell that is precise and stable.
♦ 500 000 measuring point data logger.
Read more
Ultrasonic flowmeter
✓ Suitable for use with both conductive and non-conductive liquids. ✓ Due to the seal-free sensor, there is high process safety. ✓ The measurement tube can move easily.MODEL:-F630
Magnetic inductive flowmeter, small or separate ✓ The suitable device for every application, with a wide range of options. ✓ Possible spared variation. ✓ ATEX-Authorization. ✓ Applications for hygiene. ✓ Mechanism for detecting errors.Multivariable, simple, and user-friendly smart magmeter for utilities
♦ Decent design.
♦ Enclosed control panel.
♦ Parameterization is possible via Bluetooth.
Flow switch and transmitter for basic industrial, sanitary, and aseptic applications.
♦ Applications for hygiene.
♦ Compact design.
♦ Speed of response.
Read more
♦ Installing a simple pressurized system is possible.
♦ High precision.
♦ Very little pressure drop.
Read more
♦ Quick response.
♦ Operator comfort is improved through display and operation on-site.
♦ Wireless.
Read more
♦Comprising a measurement portion, compressed air, and gas meter.
♦ Simple and affordable installation.
♦ Owing to its excellent accuracy, it is suitable for measuring leaks.
Read more
- Housing: Standard design.
- Sensing range Sn: 6 mm.
- Installation type: Quasi-flush.
- Electrical wiring: DC 3-wire.
- Switching output: PNP.
- Output function: NO.
- Connection type: Male connector M12, 4-pin.

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.