Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Output Type: PNP
- Operation Mode: NO
- Sensing Distance: 4mm
- Mounting Type: Flush
- Connection: M12
- Proximity sensor M18
- High temperature (100°C) stainless steel
- 7 mm sensing range
- DC PNP, NO, prewired, 2 m
| Sensing head size | M30 |
|---|---|
| Type | Cylinder type (with screw), Shielded |
| Power source | DC 2-wire models |
| Sensing distance | 10 mm ±10% |
| Setting distance | 0 to 8 mm |
| Operation mode | NO |
- Size: M18
- Output Type: IO-Link, PNP
- Operation Mode: NO
- Sensing Distance: 10mm
- Mounting Type: Flush
- Output Type: IO-Link, PNP
- Operation Mode: NO/NC Switching
- Sensing Distance: 15mm
- Mounting Type: Quasi-flush
The space-saving single-cable approach greatly minimizes installation effort, and the servo motor EMMT-AS for demanding and dynamic applications has a very good controllability and route accuracy for positioning jobs.
Read more
- Brushless, synchronous, permanent magnet motor.
- Either a single-turn or multiple-turn digital absolute linear potentiometer.
- High synchronization is supported even at low rotational speeds by an extremely low cogging torque.
- One connecting cable serves as the supply and encoder in simple connection technology (OCP: One Cable Plug).
- Angle-adjustable rotating plug (310°).
- offering a holding brake.
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Ultrasonic Sensor, Diffuse Reflective, M18 PBT housing, M12 Connector, Sn 50-400mm, Analogue Output 4-20mA+ NPN, Supply Voltage 15-30VDC, Operating Temperature -20-60C, Response time<50ms, Switching Frequency 10Hz, IP67, Teach-in.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.











