Filter
Sort:
Show:
CONTRINEX Light Curtains Extended Safety Sensor

CONTRINEX Light Curtains Extended Safety Sensor

According to IEC 61496-1/2, IEC 61508-1/2/3, and ISO 13849-1, Type 4 light curtains from the EXTENDED SLIM line are TÜV, CE, and UL certified. With integrated EDM*, restart interlock, and beam coding, protective heights vary from 170 to 1,610 mm. Users can also save money by using EDM instead of wired relays because it has a relay monitoring feature. The connection is made using an integrated 5-pin or 8-pin M12 pigtail, and the compact housing (26 26 mm) permits blind-zone-free placement. A world first, this selection of light curtains can be electronically controlled and monitored using a Bluetooth® signal and a free smartphone app.
Read more
BALLUFF INDUCTIVE SENSORS BES008L

BALLUFF INDUCTIVE SENSORS BES008L

Pressure-rated inductive sensors

  • Pressure-rated up to 500 bar
  • High temperature-rated up to 120 °C
  • Appropriate for use in explosion-protected areas
  • Overall dimensions from M5 to M18
  • Short and long configurations
  • With and without fixed stop

Inductive standard sensors:

  • Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
  • Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
  • Shielded and unshielded versions
  • Flush variants with ranges of up to 15 mm
  • Non-flush variants with ranges of up to 30 mm
  • Plug or cable connection
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more

Filter Products

Categories