Contrinex Light Curtains Safety Sensor

CONTRINEX Light Curtains Extended Safety Sensor

Add to Wishlist
Add to Wishlist

According to IEC 61496-1/2, IEC 61508-1/2/3, and ISO 13849-1, Type 4 light curtains from the EXTENDED SLIM line are TÜV, CE, and UL certified. With integrated EDM*, restart interlock, and beam coding, protective heights vary from 170 to 1,610 mm. Users can also save money by using EDM instead of wired relays because it has a relay monitoring feature. The connection is made using an integrated 5-pin or 8-pin M12 pigtail, and the compact housing (26 26 mm) permits blind-zone-free placement. A world first, this selection of light curtains can be electronically controlled and monitored using a Bluetooth® signal and a free smartphone app.

Category:
Tags:

Description

CONTRINEX Light Curtains Extended Safety Sensor

Light Curtains Safety Sensor
Short Specifications:-

YBES-14K4-0170-P012

Operating range 0.4…5 m
Sender wavelength IR 850 nm
Protective height 170 mm
Supply voltage 24
Polarity PNP
Safety Level Cat. 4, PL e, Type 4, SIL 3
Connection PUR, 0.3 m, 5 / 8 wire + M12 5-pin
Housing size [mm] 26 x 26 (slim)
Enclosure rating IP 65
Safety Type Kit
Response time 9.6 ms
Resolution 14 mm (finger)
Temperature range 0…+55°C
Sensor Height 170 mm
Product Range Light curtain extended slim
Beam gap 10 mm

Light Curtains Extended Safety Sensor

FEATURES:-

  • Protective height: 170 mm … 1290 mm.
  • Operating range: 0.4 … 5 m.
  • No blind zone.
  • Beam coding, EDM, start and restart interlock configurable functions.
  • Type 4 according to IEC 61496-1/2.
  • SIL 3 according to IEC 61508.
  • Category 4, PL e according to EN/ISO 13849.
  • Permanent autocontrol and optical sync.
  • Wireless configuration through Bluetooth®.

TECHNICAL DATA (at +23°C ±5°C, 24 VDC)

Resolution 14 mm
Beam axis interval 10 mm
Effective aperture angle < ± 2.5° (when operating distance ≥ 3 m)
Operating range 0.4 … 5 m
Housing size 26 mm x 26 mm x Ht
Total height (Ht) see type-specific data (page 2)
Protective height (Hs) see type-specific data (page 2)
Number of beams see type-specific data (page 2)
Response time see type-specific data (page 2)
Supply voltage 24 VDC ± 20%
Current consumption see type-specific data (page 2)
Dissipated power see type-specific data (page 2)
Polarity 2 PNP outputs
Output protection short-circuit, overload protected
Output monitoring cross-circuit monitored
Output current max. 400 mA per output (at 55°C/131°F)
Output voltage ON min. -2 V @400 mA of the operating voltage
Output voltage OFF max. 1.0 V
Output monitoring frequency 5 Hz
Leakage current when OFF state < 2 mA
Maximum load inductance 100 mH
Sender wavelength IR 850 nm
Safety level Cat. 4, PLe (EN/ISO 13849-1), Type 4 (IEC 61496-1/-2), SIL 3 (IEC 61508-1/-2/-3), SILCL3 (IEC 62061:A2)
Electrical protection class III (IEC 61140)
Startup delay < 3 s
Vibration resistance 10 to 55 Hz, 0.35 mm amplitude, 1 octave/min.,20 sweeps for each axis
Shock resistance 10 g during 16 ms, 1000 times for each axis
Light immunity incandescent lamp: 3000 lx max. (light intensity on receiver surface); xenon flash tube: flash duration 1.2 ms max. with a frequency of 2 Hz max. (IEC 61496-2)
Ambient temperature range 0 … +55°C (+32 … +131°F)
Storage temperature range -25 … +70°C (-13 … +158°F)
Air humidity 15 … 95% (non-condensing)
Enclosure rating IP65 (EN 60529/A1)
Housing material aluminum profile, PC front screen
Material of upper and lower cover PA + 30% fiberglass
Cable runs 100 m max. (at 10 nF capacitive load)
Weight see type-specific data (page 2)
Reference standards: safety IEC 61496 -1/-2, IEC 61508-1/-2/-3, IEC 62061:A2, ISO 13849-1
EN 60204-1, EN 50178
environment EN 60068-2-1, 2, 3, 6, 27
EMC EN 61000-4-2, 3, 5, 6
radio disturbance EN 55011/A2
Bluetooth® Low energy (LE), V5.0 (compatible 4.1 or later)
EDM (External Device Monitoring) Enabled or disabled
Start and restart interlock Automatic or manual
Beam coding 3 selectable codes
Configuration Through Bluetooth® with ContriApp, range <20 m