Filter

Showing all 8 resultsSorted by latest

Sort:
Show:
DATALOGIC/DATASENSING Fork Sensors SR23-5-IR-PH | 953161010

DATALOGIC/DATASENSING Fork Sensors SR23-5-IR-PH | 953161010

  • Sensing range (max.): 5 mm
  • Connection type: M8 plug 4pin
  • Switching output: PNP Don
  • Output function: Don
  • Switching frequency: 12 kHz
 
For Price Call: 01329727092 
Email: sales@voltecbd.com
Read more
DATALOGIC/DATASENSING Fork Sensors SRF-120-5-P | 95B020080

DATALOGIC/DATASENSING Fork Sensors SRF-120-5-P | 95B020080

  • Sensing range (max.): 120 mm
  • Connection type: M8 plug 3pin
  • Switching output: PNP L/D Selectable
  • Output function: L/D Selectable
  • Switching frequency: 1.5 kHz
  • Slot width: 50 mm
 
For Price Call: 01329727092 
Email: sales@voltecbd.com
Read more
DATALOGIC/DATASENSING Fork Sensors | FC6I/0B-0804-1F

DATALOGIC/DATASENSING Fork Sensors | FC6I/0B-0804-1F

  • Sensing range (max.): 80 mm
  • Connection type: M8 plug 4pin
  • Switching output: NPN / PNP L/D Selectable
  • Output function: L/D Selectable
  • Switching frequency: 10 kHz
  • Slot width: 80 mm
 
For Price Call: 01329727092 
Email: sales@voltecbd.com
Read more
FESTO Servo Motor EMMT-AS-60-S-LS-RMB

FESTO Servo Motor EMMT-AS-60-S-LS-RMB

The space-saving single-cable approach greatly minimizes installation effort, and the servo motor EMMT-AS for demanding and dynamic applications has a very good controllability and route accuracy for positioning jobs.
  • Brushless, synchronous, permanent magnet motor.
  • Either a single-turn or multiple-turn digital absolute linear potentiometer.
  • High synchronization is supported even at low rotational speeds by an extremely low cogging torque.
  • One connecting cable serves as the supply and encoder in simple connection technology (OCP: One Cable Plug).
  • Angle-adjustable rotating plug (310°).
  • offering a holding brake.
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Product ID: 751102. PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.
Read more
Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

PNOZsigma contact expansion, outputs: 4 N/O, 1 N/C, UB 24 V DC, width: 17.5 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.
Read more
PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

Product ID: 750105. PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 2 N/O, 2 N/O t-d (t = 0.04 - 300 s), 1 SC, UB = 24 V DC, width: 22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light curtain.
Read more

Filter Products

Categories