Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- A unique earth ground tester that performs fast, accurate testing with and without stakes
- Tests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)
- Performs selective earth ground rod testing (one clamp + stakes)
- Performs stakeless earth ground rod testing (two clamps)
- Features IP56 rating for outdoor use
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 30 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Oil and lubricant resistant
- Type of connection: Connector
- Operating voltage: 30 V AC/DC
- Number of conductors : 8
- Cable length: 10m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 8 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PVC
- Thread size: M8
- Type: Female, No. of pins: 4 -pin
- input specification type 1/3
- no bouncing due to mechanical switches thanks to 3 ms input filter
- tool-free connection by direct plug-in technology for solid wire conductors
- space-saving use in the control cabinet
- direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
- increased packing density with 16 connection points in the housing of a 12 mm terminal bloc
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 5m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- Encoding: A-coded .
- Type of connection: Connector.
- Operating voltage: Max. 30 V AC/DC.
- Number of conductors : 4.
- Cable length: 5m.
- Wire insulation : PVC.
- Thread size: M8.
- Type: Female.
- No. of pins: 4 -pin.
- Version Axial: Connector. LED: No.
- Lock: Screw fitting.
- Nickel-plated diecast zinc.
- Recommended torque 0.6 Nm.
- Self-locking.
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.





