Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 30 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 3m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- IP67 / IP65
- Application: Oil and lubricant resistant
- Type of connection: Connector
- Operating voltage: 30 V AC/DC
- Number of conductors : 8
- Cable length: 10m
- Wire insulation : PP
- Thread size: M12
- Type: Female, No. of pins: 8 -pin
- IP67 / IP65
- Application: Chemical resistant
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 2m
- Wire insulation : PVC
- Thread size: M8
- Type: Female, No. of pins: 4 -pin
- Type of connection: Connector
- Operating voltage: Max. 250 V AC/DC
- Number of conductors : 4
- Cable length: 5m
- Wire insulation : PVC
- Thread size: M12
- Type: Female, No. of pins: 4 -pin
- Encoding: A-coded .
- Type of connection: Connector.
- Operating voltage: Max. 30 V AC/DC.
- Number of conductors : 4.
- Cable length: 5m.
- Wire insulation : PVC.
- Thread size: M8.
- Type: Female.
- No. of pins: 4 -pin.
- Version Axial: Connector. LED: No.
- Lock: Screw fitting.
- Nickel-plated diecast zinc.
- Recommended torque 0.6 Nm.
- Self-locking.
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
SITOP DC UPS module 24 V/15 A uninterruptible power supply without interface input: 24 V DC/16 A output: 24 V DC/15 A.
Read more
SITOP power supplies
The 24 V/20 A SITOP power supplies are built-in units, IP20 degree of protection, protection class I. Primary switched-mode power supplies for connection to 1-phase AC system (TN or TT system in accordance with VDE 0100 T 300 / IEC 364-3) with rated voltages of 120/230 V, 50/60 Hz; +24 V DC output voltage, isolated, shortcircuit- proof and idling-proof. SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Read more
In order to avoid the pricey installation of two or more separate devices, the Rosemount 8800 MultiVariable Vortex Flow Meter integrates temperature and flow sensors into a single, extremely precise instrument. The integrated, detachable temperature sensor, which is isolated from the process and distinct from the Vortex flow sensor, delivers a precise process temperature measurement. It also offers temperature and pressure compensation, providing compensated mass flow and corrected volume in steam and liquid applications when the input comes from an external HART® pressure transmitter.
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.






