Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Series : 50K
- Dimension : 28.5 x 80.5 x 62 mm
- Interface : PNP normally open (NO) PNP normally closed (NC)
- Principle of operation : Photoelectric sensor
- Principle of optical operation : Diffuse sensor, triangulation
Trendmaster 200132 Pressure Transducer System - The 200132 sensor was designed to provide static (average) pressure measurements from general process monitoring to the Trendmaster† system. The Bently Nevada Trendmaster Pro online condition monitoring system links hundreds of permanently mounted transducers and measurement points onto a single-cable sensor network and transfers the data into System 1 machine condition monitoring software.
Read more
- Vibration.
- Temperature.
- Seal leaks.
- Pressure.
Pressure-rated inductive sensors
- Pressure-rated up to 500 bar
- High temperature-rated up to 120 °C
- Appropriate for use in explosion-protected areas
- Overall dimensions from M5 to M18
- Short and long configurations
- With and without fixed stop
Inductive standard sensors:
- Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
- Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
- Shielded and unshielded versions
- Flush variants with ranges of up to 15 mm
- Non-flush variants with ranges of up to 30 mm
- Plug or cable connection
Standard Pressure Transmitters
The pressure transmitters of the 21Y series are incredibly robust to environmental
impacts since they lack an internal seal and have a high insulation voltage of 300 VDC.
An intricate compensation circuit allows for the specification of a small total error band.
Electrical connections and pressure connections come in a variety of options.
SIMILAR SERIES:-
- Series 21PY.
- Series 21C.
- Series 23SY.
- Series 25Y.
SITOP DC UPS module 24 V/15 A uninterruptible power supply without interface input: 24 V DC/16 A output: 24 V DC/15 A.
Read more
SITOP power supplies
The 24 V/20 A SITOP power supplies are built-in units, IP20 degree of protection, protection class I. Primary switched-mode power supplies for connection to 1-phase AC system (TN or TT system in accordance with VDE 0100 T 300 / IEC 364-3) with rated voltages of 120/230 V, 50/60 Hz; +24 V DC output voltage, isolated, shortcircuit- proof and idling-proof. SIMATIC DP, Electronics module for ET 200S, 2 AO I 15 mm width, +/-20mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED (group fault).
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.






