Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Diameter: Ø 8mm
- Sensing Range Sn : 4mm
- Switching Output: PNP/NC
- Installation Type: Non-flush
- Diameter : Ø 6.5mm
- Sensing Range Sn : 4mm
- Switching Output : NPN/NO
- Installation Type : Non-flush
- Diameter : Ø 18mm
- Sensing Range Sn : 8mm
- Switching Output : NPN/NC
- Installation Type : Flush
- Diameter : Ø 8mm
- Sensing Range Sn : 0 mm ... 4 mm
- Output Function : Analog
- Installation Type : Quasi-flush
- Diameter: Ø 30mm
- Sensing Range Sn : 20mm
- Switching Output: PNP/Complementary
- Installation Type: Non-flush
- Sensing Range Sn: 5mm
- Switching Output: NPN/NO
- Installation Type: Non-flush
- Enclosure Rating: IP67
- Sensing Range Sn: 20mm
- Switching Output: PNP/NO
- Installation Type: Flush
- Enclosure Rating: IP67, IP68, IP69K
- Diameter: Ø 12mm
- Sensing Range Sn : 10mm
- Switching Output: PNP/NO
- Installation Type: Non-flush
8BVI0014HWS0.000-1 | ACOPOSmulti inverter module, 1.9 A, AS, wall mounting | |
8BVI0028HWS0.000-1 | ACOPOSmulti inverter module, 3.8 A, AS, wall mounting | |
8BVI0055HWS0.000-1 | ACOPOSmulti inverter module, 7.6 A, AS, wall mounting | |
8BVI0110HWS0.000-1 | ACOPOSmulti inverter module, 15.1 A, AS, wall mounting | |
8BVI0220HWS0.000-1 | ACOPOSmulti inverter module, 22 A, AS, wall mounting | |
8BVI0330HWS0.000-1 | ACOPOSmulti inverter module, 33 A, AS, wall mounting | |
8BVI0440HWS0.000-1 | ACOPOSmulti inverter module, 44 A, AS, wall mounting | |
8BVI0660HWS0.000-1 | ACOPOSmulti inverter module, 66 A, AS, wall mounting | |
8BVI0660HWS0.008-1 | ACOPOSmulti inverter module, 66 A, AS, wall mounting | |
8BVI0880HWS0.004-1 | ACOPOSmulti inverter module, 88 A, AS, wall mounting | |
8BVI0880HWS0.008-1 | ACOPOSmulti inverter module, 88 A, AS, wall mounting | |
8BVI1650HWS0.000-1 | ACOPOSmulti inverter module, 165 A, AS, wall mounting | |
8BVI1650HWS0.004-1 | ACOPOSmulti inverter module, 165 A, AS, wall mounting | |
8BVI2000HWS0.000-1 | ACOPOSmulti inverter module, 200 A, AS, wall mounting |
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Multivariable, simple, and user-friendly smart magmeter for utilities
♦ Decent design.
♦ Enclosed control panel.
♦ Parameterization is possible via Bluetooth.
- Housing: Standard design.
- Sensing range Sn: 6 mm.
- Installation type: Quasi-flush.
- Electrical wiring: DC 3-wire.
- Switching output: PNP.
- Output function: NO.
- Connection type: Male connector M12, 4-pin.

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.