Filter
Sort:
Show:
SICK Inductive Proximity Sensor IMF08-04NPONC0S | 1076751

SICK Inductive Proximity Sensor IMF08-04NPONC0S | 1076751

  • Diameter: Ø 8mm
  • Sensing Range Sn : 4mm
  • Switching Output: PNP/NC
  • Installation Type: Non-flush
Read more
SICK Inductive Proximity Sensor IMI18-08BNSNU2S | 1093937

SICK Inductive Proximity Sensor IMI18-08BNSNU2S | 1093937

  • Diameter: Ø 18mm
  • Sensing Range Sn : 8mm
  • Switching Output: NPN/NO
  • Installation Type: Flush
Read more
SICK Inductive Proximity Sensor IMS12-04BNONU2S | 1103206

SICK Inductive Proximity Sensor IMS12-04BNONU2S | 1103206

  • Diameter: Ø 12mm
  • Sensing Range Sn : 4mm
  • Switching Output: NPN/NC
  • Installation Type: Flush
Read more
SICK Inductive Proximity Sensor IHM06-04NNSVW2K | 1104513

SICK Inductive Proximity Sensor IHM06-04NNSVW2K | 1104513

  • Diameter : Ø 6.5mm
  • Sensing Range Sn : 4mm
  • Switching Output : NPN/NO
  • Installation Type : Non-flush
Read more
SICK Inductive Proximity Sensor IMG18-08BNOZC0K | 1135599

SICK Inductive Proximity Sensor IMG18-08BNOZC0K | 1135599

  • Diameter : Ø 18mm
  • Sensing Range Sn : 8mm
  • Switching Output : NPN/NC
  • Installation Type : Flush
Read more
SICK Inductive Proximity Sensor IMA08-04BE3ZC0K | 6041782

SICK Inductive Proximity Sensor IMA08-04BE3ZC0K | 6041782

  • Diameter : Ø 8mm
  • Sensing Range Sn : 0 mm ... 4 mm
  • Output Function : Analog
  • Installation Type : Quasi-flush
Read more
SICK Inductive Proximity Sensor IMB30-20NPPVU6S | 1100478

SICK Inductive Proximity Sensor IMB30-20NPPVU6S | 1100478

  • Diameter: Ø 30mm
  • Sensing Range Sn : 20mm
  • Switching Output: PNP/Complementary
  • Installation Type: Non-flush
Read more
SICK Inductive Proximity Sensor IQE17-05NNSKW2S

SICK Inductive Proximity Sensor IQE17-05NNSKW2S

  • Sensing Range Sn: 5mm
  • Switching Output: NPN/NO
  • Installation Type: Non-flush
  • Enclosure Rating: IP67
Read more
SICK Inductive Proximity Sensor IQ40-20BPSKK0S

SICK Inductive Proximity Sensor IQ40-20BPSKK0S

  • Sensing Range Sn: 20mm
  • Switching Output: PNP/NO
  • Installation Type: Flush
  • Enclosure Rating: IP67, IP68, IP69K
Read more
SICK Inductive Proximity Sensor IME12-10NPSZC0K

SICK Inductive Proximity Sensor IME12-10NPSZC0K

  • Diameter: Ø 12mm
  • Sensing Range Sn : 10mm
  • Switching Output: PNP/NO
  • Installation Type: Non-flush
Read more
EUROTHERM ESwitch Power Switch

EUROTHERM ESwitch Power Switch

Mechanical contactors are simple to replace

  • Not configured.
  • Installation that is easier.
  • International standardized.
  • Lower the cost of maintenance.
  • Minimize downtime.
  • Dependable performance.
  • Alarm for Partial Load Failure.
  • Avoidance of heating circuit malfunction.
  • PLF red-light detection.
 
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
CS INSTRUMENTS FA 500-DEW POINT SENSOR

CS INSTRUMENTS FA 500-DEW POINT SENSOR

FA 500 - Dew point sensor with integrated display and alarm relay

  • Dew point sensor FA 500 from -80 to 20°Ctd.
  • For refrigeration, membrane, and desiccant dryers, the FA 500 is the perfect dew point sensor with an integrated display and warning relay.
Read more
CS INSTRUMENTS FA 550 -DEW POINT SENSOR

CS INSTRUMENTS FA 550 -DEW POINT SENSOR

FA 550 - Dew point sensor in robust die-cast aluminum housing ✓Robust dew point sensor for gases and compressed air ✓ The Dew point FA 550 is perfectly suited for measuring dew points outside and reliably does so even in punishing industrial settings. ✓Dew point measurement after adsorption dryers, membrane dryers, or refrigeration dryer in compressed air systems.  
Read more
SICK Inductive Proximity Sensors IME12-06BPSZC0S

SICK Inductive Proximity Sensors IME12-06BPSZC0S

  • Housing: Standard design.
  • Sensing range Sn: 6 mm.
  • Installation type: Quasi-flush.
  • Electrical wiring: DC 3-wire.
  • Switching output: PNP.
  • Output function: NO.
  • Connection type: Male connector M12, 4-pin.
Read more

Filter Products

Categories