Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Diameter: Ø 8mm
- Sensing Range Sn : 4mm
- Switching Output: PNP/NC
- Installation Type: Non-flush
- Diameter : Ø 6.5mm
- Sensing Range Sn : 4mm
- Switching Output : NPN/NO
- Installation Type : Non-flush
- Diameter : Ø 18mm
- Sensing Range Sn : 8mm
- Switching Output : NPN/NC
- Installation Type : Flush
- Diameter : Ø 8mm
- Sensing Range Sn : 0 mm ... 4 mm
- Output Function : Analog
- Installation Type : Quasi-flush
- Diameter: Ø 30mm
- Sensing Range Sn : 20mm
- Switching Output: PNP/Complementary
- Installation Type: Non-flush
- Sensing Range Sn: 5mm
- Switching Output: NPN/NO
- Installation Type: Non-flush
- Enclosure Rating: IP67
- Sensing Range Sn: 20mm
- Switching Output: PNP/NO
- Installation Type: Flush
- Enclosure Rating: IP67, IP68, IP69K
- Diameter: Ø 12mm
- Sensing Range Sn : 10mm
- Switching Output: PNP/NO
- Installation Type: Non-flush
- PNP/NPN
- Light / Dark Operate
- RGB LED
- Intiuitive teach-in
- 20 ms delay activatable
- Optional lenses for distances up to 22 mm
- Device type: Receiver
- Operating range: 0.5 ... 120 m
- Switching element: PNP
- Switching principle: Light/Dark switching
- Thread size: M12
- Type: Male
- Material: Plastic
- No. of pins: 4 -pin
- Operating range: 0.5 ... 120 m
- Operating range limit: 0 ... 150 m
- Thread size: M12
- Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
- Open-circuit current: 0 ... 20 mA
- Readiness delay: 300 ms
With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.
- Stator coupling for a surface in a plane.
- Up to 0.5 mm of axial tolerance.
- hollow blind shaft.
- Positioning accuracy of down to ± 60''.
- Capability for up to 4096 revolutions in a turn.
- 115 °C is the maximum operational temperature.
- Interfaces: EnDat and DRIVE-CLiQ.
- Housing diameter ≈ 35 mm.
- The incremental HeavyDuty standard : HOG86 / POG86
- Unmatched variety, proven robustness : HOG9 / POG9
- The unrivalled benchmark : HOG10 / POG10
- The intelligent solution : HMG10P / PMG10P incremental
- SinCos output – LowHarmonics for outstanding signal quality: OGS71 ... HOGS151
- Solid shaft with EURO flange B10
- Complete portfolio of solid shaft designs
- Housing: Standard design.
- Sensing range Sn: 6 mm.
- Installation type: Quasi-flush.
- Electrical wiring: DC 3-wire.
- Switching output: PNP.
- Output function: NO.
- Connection type: Male connector M12, 4-pin.
Features-
♦ Impulse counter.
♦ Adding.
♦ Display 6- or 8-digits.
♦ With or without a reset button.
♦ Socket housing.
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.