VIPA PLC

VIPA PLC 313-5BF23-CPU313SC

Add to Wishlist
Add to Wishlist
  • SPEED7 technology.
  • 24 Digital Inputs.
  • 16 Digital Outputs.
  • 5 Analog Inputs.
  • 2 Analog Outputs.
  • 1 Analog Input Pt100, included.
  • 3x Counter.
  • 3x PWM.
  • 256… 1.024 work memory [KB].
  • Interface [RJ45]: Ethernet PG/OP communication.
  • Interface [2x RS485]: MPI, PtP: ASCII, STX/EXT, 3964(R), USS master, Modbus master/slave.
  • SD/MMC card slot with locking.
Category:
Tags:

Description

VIPA PLC 313-5BF23-CPU313SC

Features:-

  • Powered by SPEED7.
  • Work memory [KB]: 256…1.024.
  • Onboard 24x DI / 16x DO / 5x AI [current/voltage] / 2x AO / 1x Pt100 / 3x Counter / 3x PWM.
  • Interface [RJ45]: Ethernet PG/OP communication.
  • Interface [2x RS485]: MPI, PtP: ASCII, STX/ETX, 3964(R), USS master, Modbus master/slave.
  • Including front connectorSD/MMC card slot with locking, up to 8 modules stackable, programmable with WinPLC7, SIMATIC Manager and TIA Portal.

 Technical data power supply:-

Power supply (rated value) DC 24 V
Power supply (permitted range) DC 20.4…28.8 V
Reverse polarity protection yes
Current consumption (no-load operation) 240 mA
Current consumption (rated value) 700 mA
Inrush current 11 A
I²t 0.7 A²s
Max. current drain at backplane bus 3A
Max. current drain load supply –
Power loss 14 W

VIPA PLC 313-5BF23-CPU313SC

Technical data digital inputs:-

Number of inputs 24
Cable length, shielded 1000 m
Cable length, unshielded 600 m
Rated load voltage DC 24 V
Reverse polarity protection of rated load voltage yes
Current consumption from load voltage L+ (without load) 70 mA
Rated value DC 24 V
Input voltage for signal “0 DC 0…5 V
Input voltage for signal “1” DC 15…28.8 V
Input voltage hysteresis –
Signal logic input Sinking input
Frequency range –
Input resistance –
Input current for signal “1” 6 mA
Connection of Two-Wire-BEROs possible yes
Max. permissible BERO quiescent current 1.5 mA
Input delay of “0” to “1” 0.1 / 0.35 ms
Input delay of “1” to “0” 0.1 / 0.35 ms
Number of simultaneously utilizable inputs horizontal configuration 24
Number of simultaneously utilizable inputs vertical configuration 24
Input characteristic curve IEC 61131-2, type 1
Initial data size 3 Byte

Technical data digital outputs:-

Number of outputs 16
Cable length, shielded 1000 m
Cable length, unshielded 600 m
Rated load voltage DC 24 V
Reverse polarity protection of rated load voltage –
Current consumption from load voltage L+ (without load) 100 mA
Total current per group, horizontal configuration, 40°C 3A
Total current per group, horizontal configuration, 60°C 2A
Total current per group, vertical configuration 2A
Output voltage signal “1” at min. current L+ (-0.8 V)
Output voltage signal “1” at max. current L+ (-0.8 V)
Output current at signal “1”, rated value 0.5 A
Signal logic output Sourcing output
Output current, permitted range to 40°C 5 mA to 0.6 A
Output current, permitted range to 60°C 5 mA to 0.6 A
Output current at signal “0” max. (residual current) 0.5 mA
Output delay of “0” to “1” 100 µs
Output delay of “1” to “0” 100 µs
Minimum load current –
Lamp load 5W
Parallel switching of outputs for redundant control of a load possible
Parallel switching of outputs for increased power not possible
Actuation of digital input yes
Switching frequency with resistive load max. 2.5 kHz
Switching frequency with inductive load max. 0.5 Hz
Switching frequency on lamp load max. 2.5 kHz
Internal limitation of inductive shut-off voltage L+ (-52 V)
Short-circuit protection of output yes, electronic
Trigger level 1A
Number of operating cycle of relay outputs –
Switching capacity of contacts –
Output data size 2 Byte

DATA SHEET-PDF