SCHMERSAL SAFETY SWITCH WITH SEPARATE ACTUATOR AZ 16-03ZIB1-M16

SCHMERSAL SAFETY SWITCH WITH SEPARATE ACTUATOR AZ 16-03ZIB1-M16

  • 3 cable entries M 16 x 1.5.
  • Thermoplastic enclosure.
  • Coding level “High” according to ISO 14119.
  • 52 mm x 90 mm x 30 mm.
  • A long life.
  • Large wiring compartment.
  • High level of contact reliability with low voltages and currents.
Category:
Tags:

Description

SCHMERSAL SAFETY SWITCH WITH SEPARATE ACTUATOR AZ 16-03ZIB1-M16

General data-

♦ Ejection force:-Yes.

♦ Number of safety contacts:- 3.

♦ Number of cable glands:- 3.

Safety classification:-

Standards EN IEC 60947-5-1
Performance Level, up to c
Category 1
B 10D Normally-closed contact (NC) 2,000,000 Operations
Note

 

 Electrical life on request

 
Mission time 20 Year(s)

 

SCHMERSAL SAFETY SWITCH WITH SEPARATE ACTUATOR AZ 16-03ZIB1-M16

Mechanical Data:-

Actuating radius, minimum
250 mm
Actuator
straight rigid
Mechanical life, minimum
1,000,000 Operations
Positive break travel
8 mm
Positive break force per NC contact, minimum

 

 10 N
Positive break force, minimum 30 N
Actuating speed, maximum
2 m/s

 
Mounting
Screws
Type of the fixing screws
2x M6

Mechanical data – Connection technique

Cable entry
3 x M16 x 1,5

 
Termination

 

 Screw terminals

 
Cable section, minimum
0.75 mm²

 
Cable section, maximum
2.5 mm²

 
Note (Cable section)
All indications including the conductor ferrules.

 
Allowed type of cable

 

 solid single-wire solid multi-wire flexible

 

Mechanical data – Dimensions

Length of sensor
30 mm
Width of sensor
52 mm
Height of sensor
90 mm

Ambient conditions

Degree of protection IP67
Ambient temperature -30 … +80 °C
Storage and transport

temperature, minimum

 -40 °C
Storage and transport temperature, maximum

 

 +85 °C
Permissible installation altitude above sea level, maximum

 

 2,000 m

Ambient conditions – Insulation values

Rated insulation voltage Ui 500 V
Rated impulse withstand voltage U imp

 

 6 kV
Overvoltage category III
Degree of pollution 3

 SCHMERSAL SAFETY SWITCH WITH SEPARATE ACTUATOR AZ 16-03ZIB1-M16 

Electrical data

Thermal test current 10 A
Required rated short-circuit

 

 1,000 A
Switching element
Opener (NC)
Switching principle

 

 slow action, positive break NC contact

 
Switching frequency
4,000 /h

 
Material of the contacts, electrical

 

 Silver

 

Electrical data – Safety contacts

Voltage, Utilisation category AC-15

 

 230 VAC

 
Current, Utilisation category

AC-15

 4 A
Voltage, Utilisation category 24 VDC
Current, Utilisation category 4 A

Scope of delivery

Scope of delivery Slot sealing plugs

Model-

AZ 16-03ZIB1-M20,AZ 16-12ZIB1-M20,AZ 16-12ZIB1-M16,AZ 16-03ZIB1-M16

Note-

The axis of the hinge must be 5 mm above and in a parallel plane to the top surface of the safety switch. Minimum actuating radius on hinged guards is 250 mm

The actuator is not available separately.