Filter
Sort:
Show:
Ex-tech Solution XUWB9APBNL2 Explosion proof (ATEX) Photocells XUWB Series

Ex-tech Solution XUWB9APBNL2 Explosion proof (ATEX) Photocells XUWB Series

With a footprint diameter of only 30 mm these prewired photocells, certified ATEX Ex d, can be used in all types of applications and processes. With a nominal range from 0.6 m to 15 m, it will be able to meet all needs.
Read more
Ex-tech Solution XMLW-C010B2S12 Explosion proof (ATEX) Pressure switches XML Series

Ex-tech Solution XMLW-C010B2S12 Explosion proof (ATEX) Pressure switches XML Series

With a wide range of pressures, from 0.1 to 500 bars, the XMLW pressure switches allow to control luids in hazardous areas. Technor They meet the highest level of protection for the explosive atmospheres.
Read more
Leuze Throughbeam Photoelectric Sensor Receiver LE46C/4P-M12, 50127033

Leuze Throughbeam Photoelectric Sensor Receiver LE46C/4P-M12, 50127033

  • Device type: Receiver
  • Operating range: 0.5 ... 120 m
  • Switching element: PNP
  • Switching principle: Light/Dark switching
  • Thread size: M12
  • Type: Male
  • Material: Plastic
  • No. of pins: 4 -pin
Read more
Leuze Throughbeam Photoelectric Sensor Transmitter LS46C-M12 , 50127042

Leuze Throughbeam Photoelectric Sensor Transmitter LS46C-M12 , 50127042

  • Operating range: 0.5 ... 120 m
  • Operating range limit: 0 ... 150 m
  • Thread size: M12
  • Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
  • Open-circuit current: 0 ... 20 mA
  • Readiness delay: 300 ms
Read more
PARKER Directional Control Valve-D1VW

PARKER Directional Control Valve-D1VW

Parker’s D1VW directional control valves are high performance direct operated hydraulic valves. These are wet armature design solenoid valves in either 2 position or 3 position configurations. The D1VW valve conforms to D03 (NG6) mounting pattern.
Read more
BECKHOFF Communication Module EK1100 EtherCAT Coupler

BECKHOFF Communication Module EK1100 EtherCAT Coupler

The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more

Filter Products

Categories