Filter
Sort:
Show:
Leuze Laser Scanner ROD4 plus, 50106481

Leuze Laser Scanner ROD4 plus, 50106481

  • Data Transfer: 100MBit/s
  • Transistor, PNP
  • Measurement range: 0...65,000 mm
  • Detection angle: 190°
  • Scanning rate: 25 scans/s
  • Interface: Ethernet, RS 232, RS 422
Read more
Leuze Laser Scanner ROD4-30, 50110238

Leuze Laser Scanner ROD4-30, 50110238

  • Transistor, PNP
  • Measurement range: 0...65,000 mm
  • Detection angle: 190°
  • Scanning rate: 25 scans/s
  • Interface: RS 232/422
Read more
Leuze Laser Scanner ROD4-36, 50110666

Leuze Laser Scanner ROD4-36, 50110666

  • Transistor, PNP
  • Measurement range: 0...65,000 mm
  • Detection angle: 190°
  • Scanning rate: 25 scans/s
  • Interface: RS 232/422
Read more
Leuze Laser Scanner ROD4-38, 50110667

Leuze Laser Scanner ROD4-38, 50110667

  • Dust suppression
  • Measurement range: 0...25,000 mm
  • Detection angle: 190°
  • Scanning rate: 25 scans/s
  • Interface: RS 232/422
Read more
Leuze Laser Scanner ROD4-58 plus, 50113225

Leuze Laser Scanner ROD4-58 plus, 50113225

  • Data Transfer: 100MBit/s
  • Interface: RS 232/422
  • Measurement range: 0...25,000 mm
  • Detection angle: 190°
  • Scanning rate: 50 scans/s
Read more
Leuze Laser Scanner ROD4-56 plus, 50129795

Leuze Laser Scanner ROD4-56 plus, 50129795

KOYO Rotary Encoder TRD-J1000-RZ

KOYO Rotary Encoder TRD-J1000-RZ

φ50 Incremental Type

-   Long service-life with a φ50 mm miniature case and φ8 mm- thick shaft.

  • Realizes 1,024 pulses with a metal slit board that resists vibrations and impacts.

-   Wide power range of 4.75 to 30 V DC.

  • Totem-pole output suitable for cable extension.
Read more
Baumer Retro-reflective Sensors FPDM 12P5101/S35A

Baumer Retro-reflective Sensors FPDM 12P5101/S35A

With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
ACS CONTROL SYSTEM LIMIT SWITCH GWA-250-U0

ACS CONTROL SYSTEM LIMIT SWITCH GWA-250-U0

The GWA-250-U0 dual limit value switch enables the parallel configuration of up to two switching  levels for continuous measurements without the installation of extra measurement equipment. ♦ The key coding switch allows for the simplest switching point change. ♦ Switchable input. ♦ Powering integrated converters.
Read more

Filter Products

Categories