Filter
Sort:
Show:
STAHL Safety Temperature Monitor & Limiter Series 8146/5

STAHL Safety Temperature Monitor & Limiter Series 8146/5

  • When a user-defined temperature is reached or dropped below, the device disconnects; a switching capacity of up to 25 A.
  • In the event of a leak in the liquid-filled measurement system, there will be a permanent disconnect.
  • Series 8146 E ex e enclosures are available in standardized forms. On request, customized solutions are available.
Read more
TESTO Thermal Imager 872

TESTO Thermal Imager 872

  • Maximum image quality is achieved with integrated testo SuperResolution Technology at 640 x 480 pixels and IR resolution of 320 x 240 pixels.
  • Thermal sensitivity of 0.05°C for precise measurement.
  • Clever and wireless, the testo 770-3 clamp meter and the testo 605i humidity measuring equipment can wirelessly send readings using your mobile device and the free testo Thermography App (both available separately).
  • Integrated laser marker - can also be precisely seen in the thermal image as a measuring point.
Read more
WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

Special Features:

■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]

Model: 111.12, back mount

Model: 111.10, lower mount (radial)

Read more
CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and 
transforms the information into an impressed direct current proportional to the measured value.
Features:-
  • Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
  • Highest level of electrical and mechanical safety.
  • Advanced capacitive scanning system.
  • Easy axis or shaft mounting.
  • Installing a continuous shaft.
  • Enduring, upkeep-free, and simple to install.
  • Shake- and vibration-resistant.
  • Keys and switches can be used to parameterize the measuring range, rotational direction,   zero point, and characteristic curve (linear/V).
  • Analog output signal, 2-wire connector, 4...20 mA.
  • Independently adjustable zero point and span.
  • Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
Read more
CAMILLE BAUER KINAX N702 Inclination Transmitter

CAMILLE BAUER KINAX N702 Inclination Transmitter

An angle proportional inclination is transformed into a DC signal using the KINAX N702. 
An analog current change (4–20 mA) that represents the output signal is accessible. 
There is little mechanical wear on the pendulum from the sensor, which is non-contact.

Features:-

  • Magnetoresistive inclination transducer
  • Digital interfaces CANopen
  • Robust aluminum housing
  • Protection class IP66
  • Oil damped pendulum
  • Pendulum shaft without mechanical stop
Read more

Filter Products

Categories