Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
Proline Promag P 300 Electromagnetic Flowmeter, Proline Promag H 100 Electromagnetic Flowmeter, Proline Promag W 300 Electromagnetic Flowmeter,
Proline Promag W 400 Electromagnetic Flowmeter, Dosimag Electromagnetic Flowmeter, Proline Promag D 10 Electromagnetic Flowmeter,
Proline Promag E 100 Electromagnetic Flowmeter, Proline Promag H 200 Electromagnetic Flowmeter, Proline Promag H 300 Electromagnetic Flowmeter,
Proline Promag H 500 Electromagnetic Flowmeter, Proline Promag H 10 Electromagnetic Flowmeter, Proline Promag P 100 Electromagnetic Flowmeter,
Proline Promag P 200 Electromagnetic Flowmeter, Proline Promag P 500 Electromagnetic Flowmeter, Proline Promag P 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag W 800 Electromagnetic Flowmeter, Proline Promag W 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag 51W Electromagnetic Flowmeter, Proline Promag 55S Electromagnetic Flowmeter
Read more
- 3 cable entries M 16 x 1.5.
- Thermoplastic enclosure.
- Coding level "High" according to ISO 14119.
- 52 mm x 90 mm x 30 mm.
- A long life.
- Large wiring compartment.
- High level of contact reliability with low voltages and currents.
| Medium | Compressed Air |
|---|---|
| Operating Temperature | 5 ... 176 °F |
| Standard | VDMA 24 345 |
| Actuation | Sol/Sol |
| ISO Size | ISO #1 |
| Operation | 5/2 |
| Materials - Body | Diecast aluminium |
| Materials - Nuts/Screws | Zinc plated steel |
| Materials - Seals | Nitrile rubber |
| Certification - WEEE | WEEE |
| Classification - eClass 11 | 51030190 |
| Range | SXE |
| Series | ISO Star |
| Brand | Norgren |
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.