Filter
Sort:
Show:
HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.

  • Stator coupling for a surface in a plane.
  • Up to 0.5 mm of axial tolerance.
  • hollow blind shaft.
  • Positioning accuracy of down to ± 60''.
  • Capability for up to 4096 revolutions in a turn.
  • 115 °C is the maximum operational temperature.
  • Interfaces: EnDat and DRIVE-CLiQ.
  • Housing diameter ≈ 35 mm.
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
ABB Digital Positioner TZIDC

ABB Digital Positioner TZIDC

Description:

The TZIDC represents the digital, intelligent positioner for communication via HART within the positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

Read more
WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

Special Features:

■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]

Model: 111.12, back mount

Model: 111.10, lower mount (radial)

Read more
WIKA Hand-Held Pressure Indicator CPH6200

WIKA Hand-Held Pressure Indicator CPH6200

Applications ■ Calibration service companies and service industry. ■ Measurement and control laboratories. ■ Pressure tests. Special features ■ Digital indicator with interchangeable pressure sensors (plug-and-play). ■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]. ■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure. ■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate). ■ Data logger for recording measured values.
Read more

Filter Products

Categories