Filter
Sort:
Show:
SELEC 6 COLOUR ANNUNCIATOR AN-8-0-0-230V

SELEC 6 COLOUR ANNUNCIATOR AN-8-0-0-230V

  • 8 Programmable Windows
  • 6 Colour Selection
  • RS485 based communication with MODBUS RTU Protocol
Read more
BECKHOFF Bus Terminal, KL1809

BECKHOFF Bus Terminal, KL1809

  • input specification type 1/3
  • no bouncing due to mechanical switches thanks to 3 ms input filter
  • tool-free connection by direct plug-in technology for solid wire conductors
  • space-saving use in the control cabinet
  • direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
  • increased packing density with 16 connection points in the housing of a 12 mm terminal bloc
Read more
SELEC Temperature Controllers 3 Digit Dual Display

SELEC Temperature Controllers 3 Digit Dual Display

  • Single-digit temperature controller with three digits.
  • Sensor input: (TC: J, K, T, R, S/RTD: PT100).
  • Control for ON/OFF/Auto-tuning PID.
  • Only one set point.
  • 12V SSR control output with a 10A relay.
  • Compact size: 48 mm by 48 mm.
  • Mount a panel.
  • AC/DC supply voltage between 90 and 270V.
Read more
DWYER WATER LEAK DETECTOR SERIES WD3

DWYER WATER LEAK DETECTOR SERIES WD3

By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
KOBOLD Thermostat For Industrial Applications TER

KOBOLD Thermostat For Industrial Applications TER

KOBOLD room thermostats are suitable for industrial plants, greenhouses, and warehouses, and also for monitoring the maximum temperature in switchgear cabinets and relay stations. Room thermostats are supplied with TER-H 1 wall brackets.
Switching range:- -20 ... +20 ... +80 ... +130°C, adjustable. Material:-aluminum (housing). copper, brass, or stainless steel (probe). Micro switch:- SPDT max. 250 VAC, 8 (5) A at 250 VAC, 8 A at 24 VDC.
Read more
KOBOLD Pitot Tube-Differential Pressure ANU

KOBOLD Pitot Tube-Differential Pressure ANU

Pitot tube sensors are classified as differential pressure sensors for flow measurement. Connection: G1 ... G 1½, 1 ... 1½" NPT, DN25 ... 80, ANSI 1 ... 3". Material: stainless steel. pmax: 400 bar. tmax: 1175 °C. Probe length: 50 ... 8000 mm (2" ... 600").
Read more
BECKHOFF Communication Module EK1100 EtherCAT Coupler

BECKHOFF Communication Module EK1100 EtherCAT Coupler

The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more

Filter Products

Categories