Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
-
Mass flow: measurement error ±0.05 % (PremiumCal)
-
Medium temperature: -196 to 350 °C (-320 to 662 °F)
-
Nominal diameter: DN 8 to 250 (³⁄₈ to 10")
-
Compact dual-compartment housing with up to 3 I/Os
-
Backlit display with touch control and WLAN access
-
Remote display available
- Single-digit temperature controller with three digits.
- Sensor input: (TC: J, K, T, R, S/RTD: PT100).
- Control for ON/OFF/Auto-tuning PID.
- Only one set point.
- 12V SSR control output with a 10A relay.
- Compact size: 48 mm by 48 mm.
- Mount a panel.
- AC/DC supply voltage between 90 and 270V.
Proline Promag P 300 Electromagnetic Flowmeter, Proline Promag H 100 Electromagnetic Flowmeter, Proline Promag W 300 Electromagnetic Flowmeter,
Proline Promag W 400 Electromagnetic Flowmeter, Dosimag Electromagnetic Flowmeter, Proline Promag D 10 Electromagnetic Flowmeter,
Proline Promag E 100 Electromagnetic Flowmeter, Proline Promag H 200 Electromagnetic Flowmeter, Proline Promag H 300 Electromagnetic Flowmeter,
Proline Promag H 500 Electromagnetic Flowmeter, Proline Promag H 10 Electromagnetic Flowmeter, Proline Promag P 100 Electromagnetic Flowmeter,
Proline Promag P 200 Electromagnetic Flowmeter, Proline Promag P 500 Electromagnetic Flowmeter, Proline Promag P 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag W 800 Electromagnetic Flowmeter, Proline Promag W 10 Electromagnetic Flowmeter,
Proline Promag W 500 Electromagnetic Flowmeter, Proline Promag 51W Electromagnetic Flowmeter, Proline Promag 55S Electromagnetic Flowmeter
Read more
Long-lasting inline flowmeter with a small, easily accessible transmitter.
Application-
• Measuring principle is characterized by a high operable flow range and direct mass flow measurement.
• Measurement of utility and process gases as well as gas mixtures in small line sizes Device properties.
• Inline version with DN 15 to 100 (½ to 4").
• Bidirectional measurement; high measuring performance.
• Patented drift-free sensor with SIL 2.
• Compact dual-compartment housing with up to 3 I/Os.
• Backlit display with touch control and WLAN access.
• Remote display available.
Read more
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.