Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Device type: Transmitter
- Operating range: 0… 25 m
- Thread size: M12
- Type: Male
- Material: PUR
- No. of pins: 4 -pin
- Device type: Transmitter
- Operating range: 0.05 … 8.5 m
- Thread size: M8
- Type: Male
- Material: Metal
- No. of pins: 4 -pin
- Series : 50K
- Dimension : 28.5 x 80.5 x 62 mm
- Interface : PNP normally open (NO) PNP normally closed (NC)
- Principle of operation : Photoelectric sensor
- Principle of optical operation : Diffuse sensor, triangulation
- Device type: Receiver
- Operating range: 0.5 ... 120 m
- Switching element: PNP
- Switching principle: Light/Dark switching
- Thread size: M12
- Type: Male
- Material: Plastic
- No. of pins: 4 -pin
- Operating range: 0.5 ... 120 m
- Operating range limit: 0 ... 150 m
- Thread size: M12
- Supply voltage UB: 10 ... 30 V, DC, Incl. residual ripple
- Open-circuit current: 0 ... 20 mA
- Readiness delay: 300 ms
ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.
- Stator coupling for a surface in a plane.
- Up to 0.5 mm of axial tolerance.
- hollow blind shaft.
- Positioning accuracy of down to ± 60''.
- Capability for up to 4096 revolutions in a turn.
- 115 °C is the maximum operational temperature.
- Interfaces: EnDat and DRIVE-CLiQ.
- Housing diameter ≈ 35 mm.
Features:-
- Solenoid operating voltage optionally 24 VDC / 110 VAC / 230 VAC.
- With 2 switching contacts or with 4 switching contacts.
- LED function display for different voltage ranges.
- Mechanically locked, release by applying voltage.
- Electrically locked, locking by applying voltage.
Pressure-rated inductive sensors
- Pressure-rated up to 500 bar
- High temperature-rated up to 120 °C
- Appropriate for use in explosion-protected areas
- Overall dimensions from M5 to M18
- Short and long configurations
- With and without fixed stop
Inductive standard sensors:
- Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
- Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
- Shielded and unshielded versions
- Flush variants with ranges of up to 15 mm
- Non-flush variants with ranges of up to 30 mm
- Plug or cable connection
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.








