Filter
Sort:
Show:
BECKHOFF Bus Terminal, KL1809

BECKHOFF Bus Terminal, KL1809

  • input specification type 1/3
  • no bouncing due to mechanical switches thanks to 3 ms input filter
  • tool-free connection by direct plug-in technology for solid wire conductors
  • space-saving use in the control cabinet
  • direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
  • increased packing density with 16 connection points in the housing of a 12 mm terminal bloc
Read more
CAMOZZI SOLENOID VALVE 3/2-WAY G1/8 and G1/4

CAMOZZI SOLENOID VALVE 3/2-WAY G1/8 and G1/4

Series 3-valves and solenoid valves. PART NO-338-015-02. 3/2-way solenoid valve, G1/8, monostable - Mod. 338..., Mod 348.
Read more
HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.

  • Stator coupling for a surface in a plane.
  • Up to 0.5 mm of axial tolerance.
  • hollow blind shaft.
  • Positioning accuracy of down to ± 60''.
  • Capability for up to 4096 revolutions in a turn.
  • 115 °C is the maximum operational temperature.
  • Interfaces: EnDat and DRIVE-CLiQ.
  • Housing diameter ≈ 35 mm.
Read more
BALLUFF INDUCTIVE SENSORS BES008L

BALLUFF INDUCTIVE SENSORS BES008L

Pressure-rated inductive sensors

  • Pressure-rated up to 500 bar
  • High temperature-rated up to 120 °C
  • Appropriate for use in explosion-protected areas
  • Overall dimensions from M5 to M18
  • Short and long configurations
  • With and without fixed stop

Inductive standard sensors:

  • Cylindrical sensors in designs from M5 to M30 and various cuboid configuration
  • Variants for DC-3/4 wire, IO-Link and DC, AC and AC/DC 2 wire
  • Shielded and unshielded versions
  • Flush variants with ranges of up to 15 mm
  • Non-flush variants with ranges of up to 30 mm
  • Plug or cable connection
Read more
BECKHOFF Communication Module EK1100 EtherCAT Coupler

BECKHOFF Communication Module EK1100 EtherCAT Coupler

The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more

Filter Products

Categories