Filter

Showing all 5 resultsSorted by latest

Sort:
Show:
Leuze Fiber Optic Amplifier LV462C/24-150-M8, 50151464

Leuze Fiber Optic Amplifier LV462C/24-150-M8, 50151464

  • Suitable For: Glass Fiber Optics, Plastic Fiber Optics
  • Switching Output: PNP/NPN
  • Cable Type
  • Plastic Housing
Read more
Leuze Fiber Optic Amplifier LV461.1/P2, 50118398

Leuze Fiber Optic Amplifier LV461.1/P2, 50118398

  • Suitable For: Glass Fiber Optics, Plastic Fiber Optics
  • Switching Output: PNP/NPN
  • Cable Type
  • Plastic Housing
  • Switching Frequency: 500Hz
Read more
SMC High Pressure Electro-Pneumatic Regulator ITVX2000

SMC High Pressure Electro-Pneumatic Regulator ITVX2000

Stepless air pressure control is provided to an electrical signal by the Series ITVX2000 high-pressure electro-pneumatic regulator. 
They use 3 W or less of power and have an easy-to-read digital pressure display. 
The new series' maximum supply pressure is 5.0 MPa.
  • Air pressure is continuously controlled in response to an electrical signal.
  • 5.0 MPa is the maximum supply pressure.
  • Range of the set pressure: 0.01 to 3.0 MPa.
  • 3000 L/min is the maximum flow rate [ANR].
  • Fluid: Air, N2, O2, Ar.
  • Wetted parts: Fluorine grease.
Read more
CONTRINEX Light Curtains Extended Safety Sensor

CONTRINEX Light Curtains Extended Safety Sensor

According to IEC 61496-1/2, IEC 61508-1/2/3, and ISO 13849-1, Type 4 light curtains from the EXTENDED SLIM line are TÜV, CE, and UL certified. With integrated EDM*, restart interlock, and beam coding, protective heights vary from 170 to 1,610 mm. Users can also save money by using EDM instead of wired relays because it has a relay monitoring feature. The connection is made using an integrated 5-pin or 8-pin M12 pigtail, and the compact housing (26 26 mm) permits blind-zone-free placement. A world first, this selection of light curtains can be electronically controlled and monitored using a Bluetooth® signal and a free smartphone app.
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more

Filter Products

Categories