Filter
Sort:
Show:
Honeywell Valve Actuator CN7510A2001

Honeywell Valve Actuator CN7510A2001

  • 10Nm,
  • 24Vac/Vdc
  • Modulating control
  • Non-Spring return Voltage Feedback Signal and without aux
  • Switch
Read more
Barksdale Temperature Switch with IO-Link Option BTS3000

Barksdale Temperature Switch with IO-Link Option BTS3000

Features:-
  • Measuring range: -22° to +284°F (-30° to +140°C).
  • One or two switch points Analog output 4 - 20 mA or 0 - 10 V.
  • Display & electronic connection: rotatable by 320°.
  • Simple navigation menu.
  • Superior EMI protection.
  • 0.50% accuracy.
  • Enclosure Rating: Type 4X (IP65) / Type 6 (IP67).
  • IO-Link Communication Protocol option.
Read more
HONEYWELL Magnetic Flowmeter MAG 4000

HONEYWELL Magnetic Flowmeter MAG 4000

VersaFlow Magnetic Flowmeters are highly versatile, customizable and offer precise flow measurement for conductive liquids, pastes and slurries.

 
Read more
HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.

  • Stator coupling for a surface in a plane.
  • Up to 0.5 mm of axial tolerance.
  • hollow blind shaft.
  • Positioning accuracy of down to ± 60''.
  • Capability for up to 4096 revolutions in a turn.
  • 115 °C is the maximum operational temperature.
  • Interfaces: EnDat and DRIVE-CLiQ.
  • Housing diameter ≈ 35 mm.
Read more
BARKSDALE PRESSURE TRANSDUCER SERIES 420,422

BARKSDALE PRESSURE TRANSDUCER SERIES 420,422

Features:

  •  General purpose, industrial grade transducer
  •  Diffused silicon sensor for high accuracy and reliability
  •  Rugged stainless steel construction
  •  Built-in pressure snubber for high pressure applications (2000 psi and above)
  •  Wide range of electrical connections available

Applications

  •  Oil pressure hydraulics
  •  Cranes
  •  Presses
  •  Gas metering
  •  HVAC
  •  Medical equipment
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more

Filter Products

Categories