Filter
Sort:
Show:
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and 
transforms the information into an impressed direct current proportional to the measured value.
Features:-
  • Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
  • Highest level of electrical and mechanical safety.
  • Advanced capacitive scanning system.
  • Easy axis or shaft mounting.
  • Installing a continuous shaft.
  • Enduring, upkeep-free, and simple to install.
  • Shake- and vibration-resistant.
  • Keys and switches can be used to parameterize the measuring range, rotational direction,   zero point, and characteristic curve (linear/V).
  • Analog output signal, 2-wire connector, 4...20 mA.
  • Independently adjustable zero point and span.
  • Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
Read more
Danfoss Servo-Operated Solenoid Valves EV220B 15-50

Danfoss Servo-Operated Solenoid Valves EV220B 15-50

EV220B 15-50 are a universal indirect servooperated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adjustable closing time and enclosures up to IP67 ensures optimal performance even under critical working conditions.
Read more

Filter Products

Categories