Filter
Sort:
Show:
HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

HEIDENHAIN ROTARY ENCODERS ECN 1123 & EQN 1135

ECN 1100 and EQN 1100 series- Absolute rotary encoders with integral bearings.

  • Stator coupling for a surface in a plane.
  • Up to 0.5 mm of axial tolerance.
  • hollow blind shaft.
  • Positioning accuracy of down to ± 60''.
  • Capability for up to 4096 revolutions in a turn.
  • 115 °C is the maximum operational temperature.
  • Interfaces: EnDat and DRIVE-CLiQ.
  • Housing diameter ≈ 35 mm.
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

WIKA Bourdon Tube Pressure Gauge MODEL-111.10, 111.12

Special Features:

■ Reliable and cost-effective ■ Design per EN 837-1 or ASME B40.100 ■ Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"] ■ Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]

Model: 111.12, back mount

Model: 111.10, lower mount (radial)

Read more
KROHNE ELECTROMAGNETIC FLOWMETER OPTIFLUX 2300

KROHNE ELECTROMAGNETIC FLOWMETER OPTIFLUX 2300

  ELECTROMAGNETIC FLOWMETER
  • High accuracy (±0.2%), with CT approvals (OIML R49, MI-001)
  • 0D/0D installation acc. to MID MI-001 and OIML R49 accuracy class 1
  • Flange: DN25…3000 / 1…120", max. PN40 / ASME Cl 300
  • 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
Read more
WIKA Hand-Held Pressure Indicator CPH6200

WIKA Hand-Held Pressure Indicator CPH6200

Applications ■ Calibration service companies and service industry. ■ Measurement and control laboratories. ■ Pressure tests. Special features ■ Digital indicator with interchangeable pressure sensors (plug-and-play). ■ Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]. ■ Type of pressure: Positive and negative overpressure,absolute pressure and differential pressure. ■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate). ■ Data logger for recording measured values.
Read more

Filter Products

Categories