Filter
Sort:
Show:
BECKHOFF Bus Terminal, KL1809

BECKHOFF Bus Terminal, KL1809

  • input specification type 1/3
  • no bouncing due to mechanical switches thanks to 3 ms input filter
  • tool-free connection by direct plug-in technology for solid wire conductors
  • space-saving use in the control cabinet
  • direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
  • increased packing density with 16 connection points in the housing of a 12 mm terminal bloc
Read more
AECO VIBRATION LEVEL CONTROLS

AECO VIBRATION LEVEL CONTROLS

Electrical data: Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14) Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4 Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec Detection fuctions FSH/FSL: Settable on the circuit with selector switch Vibration frequency: [Hz] 200 c.a. Over voltage category: II Pollution degree: 2 (inside housing) Operative Conditions: Ambient temperature: [°C] -40 ÷ +60 Process temperature-Tc: [°C] -40 ÷ +150 Ventilation:Ventilation is not required Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30 Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm Max. mechanical load: [N] 500 laterally on vibrant rods Max. process pressure: [Bar] 16 Vibration: c.a. 200 Relative humidity: 0 ÷ 100%, suitable for outdoor use Altitude: [m] max 2.000
Read more
KELLER Pressure Transmitters Series 21Y

KELLER Pressure Transmitters Series 21Y

Standard Pressure Transmitters
The pressure transmitters of the 21Y series are incredibly robust to environmental 
impacts since they lack an internal seal and have a high insulation voltage of 300 VDC.
 An intricate compensation circuit allows for the specification of a small total error band. 
Electrical connections and pressure connections come in a variety of options.
SIMILAR SERIES:-
  • Series 21PY.
  • Series 21C.
  • Series 23SY.
  • Series 25Y.
Read more
Emerson-Rosemount 8800 MultiVariable Vortex Flow Meter

Emerson-Rosemount 8800 MultiVariable Vortex Flow Meter

In order to avoid the pricey installation of two or more separate devices, the Rosemount 8800 MultiVariable Vortex Flow Meter integrates temperature and flow sensors into a single, extremely precise instrument. The integrated, detachable temperature sensor, which is isolated from the process and distinct from the Vortex flow sensor, delivers a precise process temperature measurement. It also offers temperature and pressure compensation, providing compensated mass flow and corrected volume in steam and liquid applications when the input comes from an external HART® pressure transmitter.
Read more

Filter Products

Categories