Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Range: 13 mm ± 3 mm
- Beam path: Focused
- M12
- Supply voltage UB: 12-30 VDC
- PNP (Light Switching/Dark Switching)
- NPN(Light Switching/Dark Switching)
- 5 -pin
- 15,000 Hz
- Range: 14.5 mm ± 2 mm
- Beam path: Focused
- M8
- Supply voltage UB: 12-30 VDC
- PNP (Light Switching)
- NPN(Dark Switching)
- 4 -pin
- Range: 20 mm ± 2 mm
- Beam path: Focused
- M12
- Supply voltage UB: 12-30 VDC
- Analog Output
- PNP
- Light Switching
- 5 -pin
- RGB light laser transmitter
- Various teach variants
- Small light spot
- Switching threshold adjustment via EasyTune
- Level adaptation for glossy objects
- Keyboard lockout
- Remote teach via cable
- Pulse stretching 20ms
- White light transmitter
- Various teach variants
- Short response time
- Switching threshold adjustment via EasyTune
- level adaptation for glossy objects
- 316L stainless steel housing in WASH-DOWN-Design
- Enclosed optics design prevents bacterial carry-overs
- ECOLAB and CleanProof+ tested
- Paperless device identification
- Scratch resistant and non-diffusive plastic front cover
- Keyboard lockout
- Remote teach via cable
- Pulse stretching 20ms
- RGB transmitter
- Various teach variants
- Short response time
- Switching threshold adjustment via EasyTune
- Level adaptation for glossy objects
- Keyboard lockout
- Remote teach via cable
- 20ms pulse stretching
- White Light Transmitter
- Easy to adjust through display of the signal strength on the device
- Simple sensitivity adjustment with multiturn potentiometer
- Removable rotary operation knob enables comfortable, tool-free adjustment
- Maximum packing quality through short response time
- Automatic luster suppression
- Remote control via control cable
- Blocking of all operational controls via control cable
- Range: 14.5 mm ± 2 mm
- Beam path: Focused
- Cubic
- M8
- Supply voltage UB: 12-30 VDC
- Transistor, NPN
- Light switching
- 4 -pin
- Range: 60 mm ± 20 mm
- Beam path: Focused
- Cubic
- M8
- Supply voltage UB: 12-30 VDC
- Transistor, Push-pull
- Light switching (PNP)/dark switching (NPN)
- 4 -pin
- Range: 20 mm ± 2 mm
- Beam path: Focused
- Cubic
- M12
- Supply voltage UB: 12-30 VDC
- Transistor
- NPN
- Light/dark switchable
- 5 -pin
- input specification type 1/3
- no bouncing due to mechanical switches thanks to 3 ms input filter
- tool-free connection by direct plug-in technology for solid wire conductors
- space-saving use in the control cabinet
- direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
- increased packing density with 16 connection points in the housing of a 12 mm terminal bloc
- Operating range: 9 mm ± 3 mm.
- Beam path: Focused.
- Light source: LED, RGB.
- Transmitted-signal shape: Pulsed.
- Light spot size [at sensor distance]: 1.5 mm x 5 mm.
- Light spot orientation: Vertical.
- Type of light spot geometry: Rectangular.
Stepless air pressure control is provided to an electrical signal by the Series ITVX2000 high-pressure electro-pneumatic regulator.
They use 3 W or less of power and have an easy-to-read digital pressure display.
The new series' maximum supply pressure is 5.0 MPa.
- Air pressure is continuously controlled in response to an electrical signal.
- 5.0 MPa is the maximum supply pressure.
- Range of the set pressure: 0.01 to 3.0 MPa.
- 3000 L/min is the maximum flow rate [ANR].
- Fluid: Air, N2, O2, Ar.
- Wetted parts: Fluorine grease.
By spotting water in drip pans in air handler units, beneath raised floors in data centers, or on floors near sump pumps and drains, the Series WD3 Water Leak Detectors guard equipment against water damage. Once the water has risen to a point where it spans the two conductive strips on the housing's bottom, it is detected. Depending on the model selected, local notice of the alarm situation is provided by audio and visual alerts, and remote indication or control is provided by an internal switch to stop additional water buildup. The Model WD3-BP-D1-A is battery-powered for use in situations where power is not available. Alternatively, the water detector can be powered by either AC or DC supply voltages. By using the provided adjustable mounting bracket, the sensing height can be reduced to as little as 1/32". The mounting bracket can be fastened to any flat surface using either the mounting screws or the connected adhesive strips.
Read more
Advantages:
- Models in multicolor (RGB) or white light (W) offer optimum performance for marker detection on colorfully printed or glossy films
- White light provides greater reliability in the case of contrast markers on glossy surfaces
- Multicolor (RGB) provides better performance with colorfully printed films
- Free selection of adjustment method: intuitively using removable potentiometers, quickly and precisely by means of teach buttons. Also of course remotely through teach via cable or IO-Link
- IO-Link with dual channel: for monitoring, diagnosis, easy changeover in the case of format change
- Three teach levels ensure the perfect adjustment routine for every application
- Static 2-point teach with stationary conveyor belt based on marker and background
- Dynamic 2-point teach with running conveyor belt
- Static 1-point teach detects any contrast markers in front of a homogeneous background
- Permanent signal indication through self-adjusting bar graph on the rear side of the sensor
- Tracking function with threshold tracking for fading contrast markers
- Fine adjustment of the switching threshold through "near-to-marker" teach or EasyTune (T)
- Light spot variants with horizontal or vertical alignment
- Flexible operating range of 13 mm +- 3 mm
- Maximum switching frequencies up to 22 kHz / response time 20 µs
- Small, compact housing made of nickel-plated metal, IP67 and IP69K and ECOLAB
The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at the fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Read more
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
© 2025 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.