Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Operating range 1-30 mm, switching frequency up to 100 Hz.
Certifications: CE.
Housing material: Plastic / brass, nickel-plated.
Connector and cable variants.
Part no.: 50136628
Read more
Ultrasonic flowmeter
✓ Suitable for use with both conductive and non-conductive liquids. ✓ Due to the seal-free sensor, there is high process safety. ✓ The measurement tube can move easily.MODEL:-F630
Magnetic inductive flowmeter, small or separate ✓ The suitable device for every application, with a wide range of options. ✓ Possible spared variation. ✓ ATEX-Authorization. ✓ Applications for hygiene. ✓ Mechanism for detecting errors.
Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.