Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
- Vision Sensor
- Camera-based compartment fine positioning
- Operational Controls: Button
- Interface: Ethernet
- Supply: 18-20VDC
- Light Section Sensor
- Application : 3D object detection
- Contains: LxSsoft configuration software
- Response Time: 10ms
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 18MM
- RANGE: 2-8MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NC
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: PNP-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
- DIA: 30MM
- RANGE: 2-20MM
- OUTPUT: NPN-NO
- SUPPLY VOLTAGE: 10-30VDC
- CABLE TYPE
- 3-WIRE
- PLASTIC HOUSING
- EMBEDDED
Electrical data:
Connection terminals: 0.14 ÷ 2.5 mm2 (AWG 26 ÷ 14)
Cable entry:Cable gland: M20x1.5 with cable sheath diameter 6÷12mm CONDUIT: NPTx½ o NPT3/4
Output activation delay: Rods free → Rods covered: c.a. 1 sec Rods covered → Rods free c.a. 1... 2 sec
Detection fuctions FSH/FSL: Settable on the circuit with selector switch
Vibration frequency: [Hz] 200 c.a.
Over voltage category: II
Pollution degree: 2 (inside housing)
Operative Conditions:
Ambient temperature: [°C] -40 ÷ +60
Process temperature-Tc: [°C] -40 ÷ +150
Ventilation:Ventilation is not required
Min. powder density: [g/l] Setting A : c.a. 150 - Setting B : c.a. 30
Features of bulk material: No strong tendency to cake or deposit. Max grain size 8 mm
Max. mechanical load: [N] 500 laterally on vibrant rods
Max. process pressure: [Bar] 16
Vibration: c.a. 200
Relative humidity: 0 ÷ 100%, suitable for outdoor use
Altitude: [m] max 2.000
Read more
Operating range 1-30 mm, switching frequency up to 100 Hz.
Certifications: CE.
Housing material: Plastic / brass, nickel-plated.
Connector and cable variants.
Part no.: 50136628
Read more
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.