Need help? Call us: 01326 708334, 01326 708335 or info@voltecbd.com
◆ Explosion protection to EN, IEC
◆ Can be used in Zone 1,2,21,22 -Class I Division 2- Groups A, B, C, D
◆ 2P,3P,4P and 5P.
◆ Only the switch in the socket cut off can plug be pulled out, power after inserting the plug.
GRP(glass fiber-reinforced polyester resin)
Read more
♦Up to 46 I/Os - Base 16 DI (4 HighSpeed/ 12 AI ), 8 DO + 2 Solid State Relays.
♦Analog Inputs 4-20 mA, 0-10 Vc and 0-Vdc 12 bits.
♦Ethernet Modbus TCP/IP (Client/Server) and Modbus RTU RS485 via interface(Client/Server).
♦Event management & datalog via mail or FTP server.
♦PLC performance with the shape and ease of use of a logic controller.
Read more
A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and
transforms the information into an impressed direct current proportional to the measured value.
Features:-
-
Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
-
Highest level of electrical and mechanical safety.
-
Advanced capacitive scanning system.
-
Easy axis or shaft mounting.
-
Installing a continuous shaft.
-
Enduring, upkeep-free, and simple to install.
-
Shake- and vibration-resistant.
-
Keys and switches can be used to parameterize the measuring range, rotational direction, zero point, and characteristic curve (linear/V).
-
Analog output signal, 2-wire connector, 4...20 mA.
-
Independently adjustable zero point and span.
-
Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
An angle proportional inclination is transformed into a DC signal using the KINAX N702.
An analog current change (4–20 mA) that represents the output signal is accessible.
There is little mechanical wear on the pendulum from the sensor, which is non-contact.
Features:-
- Magnetoresistive inclination transducer
- Digital interfaces CANopen
- Robust aluminum housing
- Protection class IP66
- Oil damped pendulum
- Pendulum shaft without mechanical stop
VU 570 - Vortex ultrasonic sensor for flow measurement
Independent of the gas composition, flow meters for technical gases and mixed gases.The VU 570 helps you keep an eye on, control, and minimize your usage while
improving sustainability. One sensor can be used to track your consumption
of various gas compositions and gas types.
FA 500 - Dew point sensor with integrated display and alarm relay
- Dew point sensor FA 500 from -80 to 20°Ctd.
- For refrigeration, membrane, and desiccant dryers, the FA 500 is the perfect dew point sensor with an integrated display and warning relay.
FA 550 - Dew point sensor in robust die-cast aluminum housing
✓Robust dew point sensor for gases and compressed air
✓ The Dew point FA 550 is perfectly suited for measuring dew points outside and reliably does so even in punishing industrial settings.
✓Dew point measurement after adsorption dryers, membrane dryers, or refrigeration dryer in compressed air systems.
Read more

Voltec Engineering Limited
Automation and control products are the focus of VOLTEC ENGINEERING LIMITED. In the area of comprehensive industry solutions for alteration, upgrading, and new construction projects, VOLTEC ENGINEERING LIMITED is a one-stop solution provider.
Need Help?
01326 708335
01329 727092
Customer Service
© 2023 Voltec Engineering Ltd. | Design & Developed by mPair Technologies Ltd.