Filter
Sort:
Show:
BAUMER Diffuse Contrast Sensors OC50.CC-QL1T.72O

BAUMER Diffuse Contrast Sensors OC50.CC-QL1T.72O

  • PNP/NPN
  • Light / Dark Operate
  • RGB LED
  • Intiuitive teach-in
  • 20 ms delay activatable
  • Optional lenses for distances up to 22 mm
Read more
Baumer Retro-reflective Sensors FPDM 12P5101/S35A

Baumer Retro-reflective Sensors FPDM 12P5101/S35A

With retro-reflective sensors, the transmitter and receiver are located in one housing and combined with a prismatic reflector. The reflector reflects the emitted light beam and if the light is interrupted by an object, the sensor switches.
Read more
BAUMER Industrial Incremental Encoders HOG 86E

BAUMER Industrial Incremental Encoders HOG 86E

  • The incremental HeavyDuty standard : HOG86 / POG86
  • Unmatched variety, proven robustness : HOG9 / POG9
  • The unrivalled benchmark : HOG10 / POG10
  • The intelligent solution : HMG10P / PMG10P incremental
  • SinCos output – LowHarmonics for outstanding signal quality: OGS71 ... HOGS151
  • Solid shaft with EURO flange B10
  • Complete portfolio of solid shaft designs
Read more
CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

CAMILLE BAUER KINAX HW730/HW730-Ex Angle Transmitter

A robust, Ø78 mm, programmable hollow shaft angle transmitter
detects the angular position of a shaft without making contact with it and 
transforms the information into an impressed direct current proportional to the measured value.
Features:-
  • Hollow-shaft angle-of-rotation transmitter with a tough, weatherproof design.
  • Highest level of electrical and mechanical safety.
  • Advanced capacitive scanning system.
  • Easy axis or shaft mounting.
  • Installing a continuous shaft.
  • Enduring, upkeep-free, and simple to install.
  • Shake- and vibration-resistant.
  • Keys and switches can be used to parameterize the measuring range, rotational direction,   zero point, and characteristic curve (linear/V).
  • Analog output signal, 2-wire connector, 4...20 mA.
  • Independently adjustable zero point and span.
  • Due to the capacitive scanning mechanism, the absolute position is immediately available after turning on.
Read more
CAMILLE BAUER KINAX N702 Inclination Transmitter

CAMILLE BAUER KINAX N702 Inclination Transmitter

An angle proportional inclination is transformed into a DC signal using the KINAX N702. 
An analog current change (4–20 mA) that represents the output signal is accessible. 
There is little mechanical wear on the pendulum from the sensor, which is non-contact.

Features:-

  • Magnetoresistive inclination transducer
  • Digital interfaces CANopen
  • Robust aluminum housing
  • Protection class IP66
  • Oil damped pendulum
  • Pendulum shaft without mechanical stop
Read more
Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Pilz Safety Relay PNOZ S2 C 24VDC 3no/1nc

Product ID: 751102. PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.
Read more
Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

Pilz Safety Relay S7 750107 PNOZ S7 24VDC 4no/1nc

PNOZsigma contact expansion, outputs: 4 N/O, 1 N/C, UB 24 V DC, width: 17.5 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.
Read more
Fluke 376 FC True-RMS Clamp Meter with iFlex

Fluke 376 FC True-RMS Clamp Meter with iFlex

For industrial and commercial electricians, the Fluke 376 FC True-RMS Clamp Meter with iFlex is the most sophisticated diagnostic instrument available. The 376 is a member of the Fluke Connect series of wireless test equipment,  which uses Bluetooth connectivity to let you log, trend,  and monitor measurements while staying securely outside the arc flash zone.
Read more
Baumer Impulse Counter Totalizers–F 304

Baumer Impulse Counter Totalizers–F 304

Features- ♦ Impulse counter. ♦ Adding. ♦ Display 6- or 8-digits. ♦ With or without a reset button. ♦ Socket housing.
Read more
PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

PILZ Safety Relay PNOZ s5 24VDC 2 n/o 2 n/o t

Product ID: 750105. PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 2 N/O, 2 N/O t-d (t = 0.04 - 300 s), 1 SC, UB = 24 V DC, width: 22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light curtain.
Read more

Filter Products

Categories